Now we find the turbos in a large part of the cars in circulation, whether for systems essences ou Diesel. Just before you start this task it is of course necessary to be convinced that the trouble arises from the turbo of the famous Lancia Compact Mpv. However if you are on this page, it shows that you probably know the source.change-turbo-Lancia-Compact-Mpv

How to change the turbo in your Lancia Compact Mpv

Depending on the turbo to set up, the procedures may vary a little. When you buy a turbo it will always be sold with an assembly note. The ideal is therefore to follow it point by point. However, in the event that you still have not made the purchase, you will find below the operations to be done in order to be able to replace a turbo for this Lancia Compact Mpv. Therefore you will know what capacities are needed. Just before starting, make sure you have all of the tools required. You will have the use of a receptacle for the oil, a set of ratchets, a flat pliers, allen and flat wrenches. Often these turbos turn out to be delivered with their mounting kit which includes a few jointsFew studs and a syringe oil. We still suggest that you have a specialist check it since working with a pit turns out to be much more convenient to carry out the procedures. In addition, the turbo happens to be a rather fragile element on the Lancia Compact Mpv. Even though the technique is not particularly complicated, we nevertheless advise you to go to a specialist.

  • Change the engine block oil then replace your oil filter. Add a little oil, but not too much. It is an inevitable step!
  • Remove all the plugs present on the turbo of this Lancia Compact Mpv.
  • Check that there are no foreign bodies on the crankcases, as this can be a problem.
  • Remove the ducts with each of the screws and nuts that support your turbo.
  • Remove the faulty turbo from the Lancia Compact Mpv.
  • Fit the brand new turbo, checking that the gaskets stick completely
  • Fit the oil return pipe
  • Install all the screws and nuts you removed
  • Fill the turbo using the oil supplied with the turbo
  • Start the turbine by hand so as to activate the turbo.
  • Connect all the connections to the turbo of your Lancia Compact Mpv.
  • Now that when all the parts are in place, you need to turn on the engine block and run it for 5-10 minutes.

Now that the assembly is installed and of course that the engine has been running for a few minutes, you can take a tour at the wheel of the Lancia Compact Mpv so that the assembly works well. We also advise you to watch the quantity of oil but also of water quite often in the following weeks. Post a comment if you found this guide helpful. Enjoy the road!