Now we find turbos on a lot of cars on the market, whether it's engines essences ou Diesel. Before launching into these manipulations, you must obviously be convinced that the problem comes from the turbo of this Lancia Delta 2. That said, given that you are reading to us, this reveals that you probably know the reason.
How to change the turbo on your Lancia Delta 2
Compared to the turbo to install, manipulations will fluctuate very slightly. In the event that you obtain a turbocharger, the product will always be delivered together with an assembly manual. The best thing to do is while you read it. However if you have not yet made the purchase, here are the main lines so as to replace a turbo compressor in a Lancia Delta 2. So you will know what capacities are needed. Before you start, make sure you have all of the tools required. You will use your oil container, a set of ratchet wrenches, your pliers, allen and flat wrenches. Most of the time, turbochargers turn out to be sold with a mounting kit comprising joints, studs and a syringe oil. We still advise you to go to a professional because working with a pit turns out to be much easier to carry out the work. What is more, the turbocharger happens to be a particularly fragile constituent for a Lancia Delta 2. Even if the technique is not really laborious, it is still advised to go to a technician.
- Drain the engine block then replace this oil filter. Replace a little oil, without putting too much. This is a necessary procedure!
- Remove all the plugs around the turbocharger of your Lancia Delta 2.
- Check that there are no foreign bodies in the casings, as this is a cause of problem.
- Remove the ducts as well as all of the screws and the nuts which support this turbocharger.
- Remove the failed turbocharger from the Lancia Delta 2.
- Reassemble the brand new turbocharger, checking that the locations correspond completely
- Fit the oil return pipe
- Reinstall all the required screws and nuts
- Fill the turbocharger with the supplied oil
- Operate the turbine by hand to activate the turbocharger.
- Connect all the components to the turbocharger of this Lancia Delta 2.
- As soon as all the parts turn out to be installed, you will be able to start the engine block and let it run for a few minutes.
Now that everything is in place and of course the car has been running for ten minutes, you can drive the wheel of the Lancia Delta 2 to check that everything is working properly. We also advise you to check the quantity of oil but also of water regularly in the days to come. Post a comment if this file has ever been useful to you. Good walk !