Today we find turbos in a lot of new cars, whether it's the engines essences ou Diesel. Just before starting this task you must naturally be convinced that the hassle comes from the turbo of your Renault Ellypse. However, since you are on this page, it means that you certainly know the reason.change-turbo-Renault-Ellypse

How to change the turbo of your Renault Ellypse

Depending on the turbo to be positioned, procedures may vary a bit. As soon as you get a turbocharger, the product is systematically sold with assembly instructions. The best is therefore to follow it point by point. By cons in case you have not made the purchase, here are the main lines to replace a turbo for this Renault Ellypse. This way you will know what abilities are needed. Just before you start, make sure you have all of the tools required. You will have the utility of your bucket for oil, a bunch of ratchet wrenches, your pliers, your allen and flat wrenches. Often these turbos are found to be supplied with their mounting kit which includes some jointsFew studs and a little oil. However, we advise you to have it checked by a mechanic since working from a pit is even more convenient to carry out this kind of process. In addition, the turbocharger remains a particularly sensitive component in the Renault Ellypse. Even if the technique is not very difficult, we still advise you to go to a mechanic.

  • Drain the engine then replace your oil filter. Replace a small amount of oil. This is an imperative phase!
  • Remove all the plugs from the turbocharger in your Renault Ellypse.
  • Check that there are no residues inside the casings, as this is undoubtedly a cause of malfunction.
  • Remove the ducts but also all of the screws and the nuts which will allow your turbocharger to hold.
  • Remove the existing turbocharger from your Renault Ellypse.
  • Install the new turbocharger, checking that the locations stick completely
  • Refit the oil return pipe
  • Fit each of the required screws and nuts
  • Fill the turbocharger with the oil supplied with the turbo
  • Rotate the turbine with your hands to rotate the turbocharger.
  • Reattach all of the components to the Renault Ellypse turbocharger.
  • Once each of the components are installed, you must start the engine and run it for 5 to 10 minutes.

Now that everything is in order and of course the engine has been running for 5 to 10 minutes, you can walk around in your Renault Ellypse so that you can see that everything is working properly. At the same time, we advise you to watch the oil and water level quite often in the weeks that follow. Leave a comment in case our tutorial has served you. Good walk !