Now we find turbos in most vehicles in the last 20 years, whether it's for systems essences ou Diesel. Before embarking on DIY, you must of course be convinced that the problem comes from the turbo in your Renault Espace 2. However, if you are on this page, it means that you most likely know the reason.
How to change the turbo of your Renault Espace 2
Depending on the turbo to be positioned, the procedures may fluctuate very slightly. When you buy a turbo it will usually be sold with an instruction manual. The best thing to do then is to follow it point by point. However, in the event that you still have not made the purchase, we offer you the main axles so as to replace a turbo for a Renault Espace 2. In this way you will know if you have the skills. Before starting, make sure you have all of the tools adequate. You will have the use of a receptacle for the oil, a set of ratchets, a flat pliers, allen and flat wrenches. In general, turbochargers are sold with a set of utensils that contain joints, studs and a portion oil. We still recommend that you have a specialist checked out because tinkering with a pit is much easier for these processes. In addition, the turbo turns out to be a rather fragile element in the Renault Espace 2. Even though the technique is not very laborious, we still advise you to go to a specialist.
- Change the engine oil and replace your oil filter. Replace a little oil, but very little. It is an imperative manipulation!
- Remove all the plugs present around the turbo of the Renault Espace 2.
- Watch that there are no undesirable elements at the level of the housings, as this is undoubtedly a source of concern.
- Remove the ducts and of course all the screws as well as the nuts that hold your turbo.
- Remove the turbo in place in this Renault Espace 2.
- Reassemble the new turbo, checking that the locations match perfectly
- Replace the oil return pipe
- Install each of the required screws and nuts
- Fill the turbo with oil from your syringe
- Rotate the turbine with your hands to operate the turbo.
- Assemble all the components to the turbo of your Renault Espace 2.
- As soon as each of the parts is fitted, you can start the engine and let it run for about ten minutes.
Now that everything is installed and screwed in and the engine has been running for a few minutes, you have to walk around with this Renault Espace 2 to check that the assembly works properly. At the same time, we advise you to check the quantity of oil and water quite frequently in the days to come. Post a comment if our tutorial was useful for you. Good walk !