Now we find the turbos in a large part of the automobiles on the market, be it the engines essences ou Diesel. Just before starting work, it is of course necessary to be certain that the hassle comes from the turbo of your Renault Frendzy. But since you're reading from us, it reveals that you probably know the cause.change-turbo-Renault-Frendzy

How to change the turbo of your Renault Frendzy

Compared to the turbo to be positioned, part of the manipulations will be able to fluctuate a bit. As soon as you buy a turbo the product will always be sold with an assembly note. It is best to follow it point by point. However, in case you have not yet made the purchase, you will find below the manipulations to do to replace a turbo in this Renault Frendzy. Therefore you will know if you have the skills. Before getting started, make sure you have all of the tools indispensable. You will need your receptacle for engine oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Usually these turbochargers are sold with a tool kit which contains joints, studs as well as a syringe oil. We still recommend that you go to a pro simply because working with a pit turns out to be much more practical for doing this kind of work. In addition, the turbo remains a very delicate component on the Renault Frendzy. You should know that the technique is not really difficult, we still advise you to go to a specialist.

  • Drain the engine block then replace the oil filter. Add a little oil, but not too much. This is an imperative step!
  • Remove all the plugs present on the turbo of this Renault Frendzy.
  • Check that there are no undesirable elements inside the casings, since this is undoubtedly a source of malfunction.
  • Remove the ducts and all of the screws and nuts that will hold the turbo.
  • Put the turbo in place in the Renault Frendzy.
  • Set up the new turbo, checking that the locations completely agree
  • Fit the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbo with the supplied oil
  • Operate the turbine with your hands to turn the turbo.
  • Connect all the turbo connections of this Renault Frendzy.
  • As soon as all the components are installed, you must start the engine block and run it for a few minutes.

Now that everything is in place and the engine has been running for a while, you can get around at the wheel of the Renault Frendzy so that you can see that everything is working properly. It is also advisable to check the amount of oil and water regularly in the weeks that follow. Post a comment if this guide was useful to you. Good road !