Now we find these turbos on a lot of vehicles in circulation, as much on engines essences ou Diesel. Just before embarking on these manipulations you will obviously have to be sure that the problem arises from the turbo of the famous Renault Grand Espace 3. However, if you are reading this article, it means that you probably know the reason.
How to change the turbo of your Renault Grand Espace 3
Compared to the turbo to be presented, the processes may fluctuate a bit. As soon as you get a turbo it is always delivered with assembly instructions. It is therefore best that you read it. However, if you have not yet made the purchase, here are the steps to follow in order to replace a turbo on a Renault Grand Espace 3. This way you will know if you have the required skills. Before you begin, be sure to have all of the tools adequate. You will have the use of a receptacle for engine oil, a set of ratchets, a flat pliers, allen wrenches as well as flat. Most of the time, these turbos will come with a set of utensils including a few jointsFew studs as well as a little oil. Despite everything, we advise you to go see a mechanic because tinkering with a pit remains more convenient to carry out this type of process. In addition, the turbo is a very delicate component for a Renault Grand Espace 3. You should know that the technique is not really complicated, it is nevertheless advisable to go to a technician.
- Drain the engine block then replace the oil filter. Add a little oil, in a small quantity. This is an inevitable step!
- Remove all the plugs found on the turbo of the Renault Grand Espace 3.
- Check that there are no foreign bodies in the housings, as this is undoubtedly a cause for concern.
- Remove the ducts but also all the screws but also the nuts that will hold the turbo.
- Remove the faulty turbo from this Renault Grand Espace 3.
- Fit the new turbo, checking that the gaskets stick perfectly
- Fit the oil return pipe
- Install all of the screws and nuts you removed
- Fill the turbo with oil from your syringe
- Operate the turbine with your hands so that the turbo turns.
- Connect all the elements to the turbo of this Renault Grand Espace 3.
- Once all the components are installed, you will be able to turn on the engine block and run it for about ten minutes.
Now that everything is in order and the car has been running for at least 5 minutes, you can take a ride in this Renault Grand Espace 3 to check that everything is working properly. At the same time, it is advisable to check the quantity of oil but also of water regularly in the days to come. Write a comment if this file was useful. Good walk !