Today we find turbos in most automobiles of the past 20 years, whether in engines essences ou Diesel. Before starting the work, you will of course have to be convinced that the problem comes from the turbo of your Renault Grand Kangoo. However, since you are reading to us, you probably know the cause.change-turbo-Renault-Grand-Kangoo

How to change the turbo of your Renault Grand Kangoo

Compared to the turbo to install, procedures can fluctuate a bit. In case you get a turbo it will usually come with assembly instructions. The best thing to do is to follow it to the letter. That said, if you still haven't made the purchase, here are the main lines to replace a turbo compressor for a Renault Grand Kangoo. Therefore you will understand what abilities are needed. Just before you start, make sure you have all of the tools indispensable. You are going to have the use of an oil container, a set of ratchet wrenches, your flat pliers, your allen keys as well as flat. Typically, turbochargers will be supplied with a tool kit that contains joints, studs but also a little oil. We still recommend that you go to a mechanic since working with a pit is even easier for the work. Furthermore, the turbo turns out to be a fairly sensitive element on this Renault Grand Kangoo. Even if the operation is not downright complicated, we still advise you to go to a mechanic.

  • Drain the engine block then replace this oil filter. Replace a little oil, without putting too much. This is an inevitable phase!
  • Remove the various plugs found on the turbo of the Renault Grand Kangoo.
  • Check that there are no residues on the casings, since this is a cause of malfunction.
  • Remove the conduits as well as all the screws and then the nuts which will maintain this turbo.
  • Remove the existing turbo from this Renault Grand Kangoo.
  • Reassemble the new turbo, checking that the locations are exactly suitable
  • Replace the oil return pipe
  • Install all the necessary screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Start the turbine manually to operate the turbo.
  • Reconnect the various turbo connections of your Renault Grand Kangoo.
  • Once all the parts are in place, you will be able to start the engine block and let it run for a few minutes.

Now that the turbo is in place but also that the car has been running for a few minutes, you can drive at the wheel of this Renault Grand Kangoo in order to see that everything is working properly. It is also advisable to look at the amount of oil but also of water quite frequently for 15 days. Leave a comment in case our tutorial was useful. Good road !