Nowadays you can find the turbos on a lot of vehicles on the market, whether in systems essences ou Diesel. Just before getting started in DIY it is of course necessary to be certain that the problem comes from the turbo of your Renault Kangoo 2. But if you are reading to us, this shows that you very probably know the source.change-turbo-Renault-Kangoo-2

How to change the turbo on your Renault Kangoo 2

Depending on the turbo to be installed, procedures may vary very slightly. As soon as you get a turbo it will usually be provided with a note of achievement. The ideal is thus to follow it point by point. That said, in the event that you have not yet made the purchase, here are the main axes to change a turbo compressor on a Renault Kangoo 2. In fact you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You are going to use a bucket for engine oil, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Most of the time, the turbochargers turn out to be supplied with a mounting kit comprising a few jointsFew studs and a portion oil. We still advise you to have a check done by a mechanic since working with a pit is much easier to do these manipulations. In addition, the turbo is a really delicate element in a Renault Kangoo 2. Even if the handling is not very complicated, we nevertheless advise you to go to a professional.

  • Change the engine oil and change the oil filter. Replace a bit of oil, but very little. This is an essential step!
  • Remove all the plugs found around the turbo of your Renault Kangoo 2.
  • Examine that there are no desirable non-elements in the casings, since this is sometimes a source of malfunction.
  • Remove the ducts and all the screws and then the nuts which hold the turbo.
  • Remove the existing turbo from this Renault Kangoo 2.
  • Fit the new turbo, checking that the seals are completely suitable
  • Refit the oil return pipe
  • Replace each of the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine with your hands to operate the turbo.
  • Reconnect all the components to the turbo of this Renault Kangoo 2.
  • As soon as each of the parts are assembled, you can start the engine and let it run for ten minutes.

Now that the turbo is in place but also that the engine has been running for ten minutes, do not hesitate to take a ride in this Renault Kangoo 2 to check that the assembly is running well. We also advise you to watch the oil and water level regularly in the days to come. Leave a comment in case this text was useful. Good road !