Now we find turbos on a lot of new vehicles, whether in systems essences ou Diesel. Just before you start DIY, you must of course be sure that the problem comes from the turbo of this Renault Kangoo Rx-4. That said, since you are on this page, it means that you probably know the source.change-turbo-Renault-Kangoo-Rx-4

How to change the turbo on your Renault Kangoo Rx-4

Compared to the turbo to be implemented, part of the procedures can change a bit. In case you buy a turbocharger this is usually supplied with a performance note. So the best thing to do is read it. That said, if you have not purchased the product, here are the main lines to change a turbo compressor for this Renault Kangoo Rx-4. This way you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You are going to use a bucket for oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Most of the time, these turbos will be supplied with their tool kit which contains joints, studs and a little oil. We still recommend that you go to a mechanic because tinkering from a pit is more convenient for these manipulations. Furthermore, the turbocharger is a rather sensitive component in this Renault Kangoo Rx-4. You should know that the technique is not extremely complex, we still advise you to go to a specialist.

  • Change the engine and change your oil filter. Add a small amount of oil. This is an imperative procedure!
  • Remove all the plugs around the turbocharger of your Renault Kangoo Rx-4.
  • Check that there are no residues inside the casings, as this can be a source of problem.
  • Remove the ducts with all the screws and the nuts that will hold your turbocharger.
  • Remove the existing turbocharger from this Renault Kangoo Rx-4.
  • Reassemble the new turbocharger, checking that the seals are completely suitable
  • Replace the oil return pipe
  • Mount all the screws and nuts that you removed
  • Fill the turbocharger using oil from your syringe
  • Start the turbine manually so that the turbocharger turns.
  • Assemble all the connections to the turbocharger of your Renault Kangoo Rx-4.
  • Once all the components are assembled, you can start the engine and let it run for a few minutes.

Now that everything is in order but also that the car has been running for at least 5 minutes, do not hesitate to get behind the wheel of this Renault Kangoo Rx-4 so as to check that the whole thing is working properly. It is advisable at the same time to look at the level of oil but also of water quite frequently in the days to come. Write a comment if this file has ever helped you. Enjoy again!