Today we find turbos on a lot of cars from the last 20 years, whether in engines essences ou Diesel. Just before you start these manipulations you will of course have to be sure that the problem comes from the turbo of this Renault Kangoo. That said, since you're reading this article, it shows that you probably know the cause.
How to change the turbo of your Renault Kangoo
Depending on the turbo to be implemented, some of the procedures may fluctuate a bit. In case you get a turbocharger it will always be sold with an assembly manual. It is therefore ideal that you follow it to the letter. However if you have not yet made the purchase, you will find below the manipulations to be able to change a turbo in this Renault Kangoo. So you will understand if you have the skills. Just before you start, make sure you have all the tools adequate. You will need your container for engine oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Usually, the turbos will be supplied with a lot of utensils which contains some jointsFew studs as well as a little oil. However, we recommend that you go to a specialist because working with a pit is much more convenient for this type of work. Furthermore, the turbocharger happens to be a particularly delicate component on a Renault Kangoo. You should know that the operation is not very difficult, it is still recommended to go to a mechanic.
- Change the engine block oil and change the oil filter. Put a bit of oil back, but not too much. This is an essential phase!
- Remove all the plugs found on the turbocharger of this Renault Kangoo.
- Watch that there are no desirable non-elements inside the casings, since this is sometimes a source of problem.
- Remove the ducts as well as all of the screws and nuts which support the turbocharger.
- Remove the existing turbocharger from your Renault Kangoo.
- Fit the new turbocharger, checking that the seals fit exactly
- Install the oil return pipe
- Replace all the screws and nuts you removed
- Fill the turbocharger using the oil supplied with the turbo
- Operate the turbine by hand to operate the turbocharger.
- Reconnect all components to the Renault Kangoo turbocharger.
- Now that when all the parts have been installed, you will turn on the engine block and run it for 5 to 10 minutes.
Now that the assembly is installed but also that the car has been running for 5 to 10 minutes, do not hesitate to drive in your Renault Kangoo so as to check that the assembly is working properly. It is also advisable to watch the oil and water level fairly often for 15 days. Leave a comment in case this file was useful to you. Enjoy the road!