Now we find the turbos in much of the cars of the last 20 years, whether in engines essences ou Diesel. Before starting the work you will obviously have to be sure that the malfunction comes from the turbo of the famous Seat 133. However, since you are reading this article, it is because you probably know the cause.change-turbo-Seat-133

How to change the turbo on your Seat 133

Depending on the turbo to be installed, the processes will be able to fluctuate a little. As soon as you buy a turbocharger it will usually be sold with a performance note. The best thing to do is to follow it to the letter. But if you still have not bought the product, we offer you the main axes to be able to replace a turbo in your Seat 133. Thereafter you will understand if you have the required skills. Before starting, make sure you have all of the tools required. You will need your bucket for engine oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Typically, turbochargers are found to be sold with a mounting kit that includes a few jointsFew studs and a portion oil. We still recommend that you go see a professional because working from a pit is much easier to do this kind of work. And of course, the turbocharger remains a fairly sensitive component in a Seat 133. Even if the technique is not downright complicated, we nevertheless advise you to go to a garage.

  • Drain the engine block and replace this oil filter. Add a small amount of oil. This is an imperative phase!
  • Remove the various plugs that there are around the Seat 133 turbocharger.
  • Check that there are no residues inside the casings, since this is undoubtedly a source of problem.
  • Remove the ducts with all the screws but also the nuts which will support this turbocharger.
  • Remove the turbocharger in place in the Seat 133.
  • Fit the brand new turbocharger, checking that the seals stick completely
  • Fit the oil return pipe
  • Replace each of the screws and nuts you removed
  • Fill the turbocharger with the oil supplied with the turbo
  • Start the turbine by hand so that the turbocharger turns.
  • Reattach the various connections to the turbocharger of this Seat 133.
  • As soon as each of the components turns out to be in place, you can start the engine block and let it run for 5 to 10 minutes.

Now that everything is in order but also that the car has been running for at least 5 minutes, it is necessary to get behind the wheel of the Seat 133 to verify that everything is working well. It is advisable at the same time to check the quantity of oil but also of water quite frequently in the following weeks. Post a comment if this file was useful. Good walk !