Now there are turbos in a large part of the vehicles on the market, whether in systems essences ou Diesel. Before starting this task it is of course necessary to be convinced that the hassle occurs from the turbo of your Seat Arona. But if you're reading to us, it shows that you most likely know the reason.change-turbo-Seat-Arona

How to change the turbo of your Seat Arona

Depending on the turbo to be positioned, manipulations can vary a bit. In case you buy a turbo it will usually be supplied with an assembly manual. The ideal is therefore to follow it point by point. But if you have not made the purchase, discover the main axes in order to replace a turbo compressor for your Seat Arona. So you will know what capabilities are needed. Before you start, you must have all of the tools adequate. You are going to have the use of an oil receptacle, a bunch of ratchet wrenches, your pliers, allen and flat wrenches. Typically, turbochargers come with their tool kit which includes a few jointsFew studs as well as a dose oil. We still advise you to go see a pro because working from a pit is even more convenient to do these manipulations. Furthermore, the turbo turns out to be a fairly delicate component in this Seat Arona. You should know that the handling is not frankly laborious, we still advise you to go to a garage.

  • Change the engine oil then replace your oil filter. Add a little oil, but very little. This is an essential manipulation!
  • Remove all the plugs found around the turbo of this Seat Arona.
  • Examine that there are no desirable non-elements in the casings, since this is sometimes a source of concern.
  • Remove the conduits with each of the screws but also the nuts which will maintain your turbo.
  • Remove the faulty turbo from the Seat Arona.
  • Fit the new turbo, checking that the locations match perfectly
  • Refit the oil return pipe
  • Fit all the necessary screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine by hand so that the turbo operates.
  • Reconnect all components to the Seat Arona turbo.
  • As soon as all the parts have been installed, you can start the engine and let it run for 5 to 10 minutes.

Now that the turbo is in place but also that the car has been running for at least 5 minutes, it is necessary to drive with the Seat Arona in order to check that the assembly is working properly. We also recommend that you check the oil and water level fairly frequently in the weeks that follow. Post a comment in case this tutorial helped you. Enjoy again!