Now we find the turbos in a lot of new cars, whether in systems essences ou Diesel. Before you get started, you will of course have to be sure that the malfunction comes from the turbo of the famous seat cordoba. However since you are reading this article it is that you most likely know the cause.
How to change the turbo of your seat cordoba
Depending on the turbo to be installed, methods may change slightly. As soon as you buy a turbo it will be systematically supplied with a manual. The ideal is therefore that you follow it to the letter. However, in the event that you have not yet purchased the product, here are the steps to follow in order to replace a turbo for your seat cordoba. Therefore you will know if you are capable of it or not. Just before you start, make sure you have all of the tools indispensable. You will need your receptacle for engine oil, a set of ratchet wrenches, your pliers, allen wrenches as well as wrenches. Typically, turbos will be sold with a lot of utensils that includes joints, studs as well as a portion oil. It is nevertheless advisable to go to a mechanic because tinkering with a pit remains more convenient for handling. In addition, the turbo is a really delicate element for this seat cordoba. You should know that the handling is not super laborious, we still advise you to go to a professional.
- Drain the engine block then replace the oil filter. Add a little oil, but not too much. This is an essential manipulation!
- Remove all the plugs found at the turbo of your seat cordoba.
- Check that there are no foreign bodies in the casings, because this is sometimes a cause of problem.
- Remove the conduits and of course each of the screws and then the nuts which will support the turbo.
- Remove the existing turbo from this seat cordoba.
- Fit the all-new turbo, checking that the seals match exactly
- Replace the oil return pipe
- Replace all the necessary screws and nuts
- Fill the turbo with the oil supplied with the turbo
- Rotate the turbine with your hands to operate the turbo.
- Connect all the connections to the turbo of your seat cordoba.
- Now that when all the components are in place, you need to turn on the engine block and let it run for a few minutes.
Now that everything is set up and screwed and of course the car has been running for at least 5 minutes, you can take a ride at the wheel of this seat cordoba to check that the whole thing is working properly. We also advise you to check the oil level but also the water level quite frequently in the following weeks. Leave a comment if our tutorial ever helped you. Enjoy the road!