Today we find the turbos on a lot of cars from the last 20 years, whether in engines essences ou Diesel. Before starting the DIY you will obviously have to be convinced that the problem comes from the turbo of the famous seat exeo. However, since you are reading this article, it means that you probably know the source.change-turbo-seat-exeo

How to change the turbo of your seat exeo

Depending on the turbo to be installed, some of the methods may vary very slightly. When you buy a turbo it is systematically supplied with a manual. The ideal is then to follow it point by point. However, in the event that you have not yet purchased the product, here are the steps to take in order to change a turbo on the seat exeo. In this way you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You will use your bucket for engine oil, a bunch of ratchet wrenches, flat pliers, your allen and flat wrenches. Typically, these turbos will be supplied with a tool kit that includes a few jointsFew studs as well as a little oil. We still advise you to go see a pro simply because working with a pit is more practical to carry out the manipulations. In addition, the turbo remains a very fragile constituent in a seat exeo. You should know that the operation is not extremely complex, we still advise you to go to a technician.

  • Change the engine block oil and change this oil filter. Put a little oil, but very little. This is an imperative phase!
  • Remove all the plugs around the turbo of your seat exeo.
  • Check that there are no residues on the casings, as this is sometimes a source of concern.
  • Remove the conduits as well as all the screws and nuts that will hold this turbo.
  • Remove the existing turbo from the seat exeo.
  • Install the brand new turbo, checking that the seals match perfectly
  • Install the oil return pipe
  • Fit all the necessary screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine manually to activate the turbo.
  • Connect all the connections to the turbo of this seat exeo.
  • Once all the components turn out to be assembled, you will start the engine block and let it run for a few minutes.

Now that the turbo is in place but also that the car has been running for a while, you will be able to walk around at the wheel of the seat exeo to check that everything is working properly. It is also advisable to check the oil and water level often enough for 15 days. Write a comment if this text helped you. Good walk !