Now we can find turbos in most cars in circulation, both on systems essences ou Diesel. Before starting this task, you must naturally be convinced that the hassle comes from the turbo of the famous Seat Fura. However, if you are reading from us, this indicates that you probably know the source.
How to change the turbo of your Seat Fura
Depending on the turbo to be positioned, some of the procedures may fluctuate very slightly. As soon as you get a turbo it will usually be provided with a performance note. The best is therefore that you follow it to the letter. That said, if you have not yet made the purchase, we offer the major axes so as to replace a turbo compressor for your Seat Fura. So you will understand whether you are capable of it or not. Before starting, you must have all of the tools required. You will have the utility of an oil receptacle, a set of ratchet wrenches, your flat pliers, your allen and flat wrenches. In general, these turbochargers are found to be supplied with a batch of utensils which includes some jointsFew studs but also a little oil. It is still advisable to go to a mechanic simply because tinkering from a pit is much easier to do these jobs. And of course, the turbo is a really sensitive component in a Seat Fura. You should know that the handling is not particularly laborious, we still advise you to go to a professional.
- Change the engine, then replace your oil filter. Add a small amount of oil. This is a necessary step!
- Remove all the plugs present at the turbo of the famous Seat Fura.
- Examine that we do not find desirable non-elements within the casings, because that is a source of concern.
- Remove the ducts with all the screws and the nuts which support your turbo.
- Remove the existing turbo from this Seat Fura.
- Reassemble the new turbo, checking that the seals are completely suitable
- Refit the oil return pipe
- Reassemble all the screws and nuts that you removed
- Fill the turbo with oil from your syringe
- Operate the turbine manually so that the turbo operates.
- Assemble all the components for the turbo of this Seat Fura.
- Once all the parts are assembled, you must start the engine and let it run for a few minutes.
Once the assembly is installed but also that the engine has been running for at least 5 minutes, you must walk around with this Seat Fura so as to examine that the assembly is running well. We also advise you to check the oil level but also the water level regularly in the weeks that follow. Leave a comment if our tutorial has ever served you. Good walk !