Now we can find turbos in most vehicles on the market, as many on systems essences ou Diesel. Just before starting the work it is of course necessary to be certain that the problem comes from the turbo of this Seat Mii. But since you're reading from us, it means you probably know the reason.change-turbo-Seat-Mii

How to change the turbo on your Seat Mii

Depending on the turbo to be installed, processes may change slightly. As soon as you get a turbo the product will usually be delivered with an assembly note. It is best to follow it to the letter. That said, if you have not bought the product, you will find below the manipulations to do so as to replace a turbo compressor for your Seat Mii. Therefore you will know if you have the required skills. Just before you start, make sure you have all of the tools adequate. You will need a container for the oil, a bunch of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Generally, turbochargers will be delivered with their batch of utensils which includes joints, studs and a portion oil. It is still advisable to go to a professional because working with a pit turns out to be easier to carry out the procedures. In addition, the turbo proves to be a fairly sensitive component in the Seat Mii. Even if the handling is not very laborious, we still advise you to go to a specialist.

  • Drain the engine and replace the oil filter. Add a little oil, in small quantities. It is an inevitable procedure!
  • Remove all the plugs found at the turbo of this Seat Mii.
  • Check that there are no residues inside the casings, as this is undoubtedly a cause for concern.
  • Remove the ducts with all the screws and nuts that hold the turbo.
  • Remove the turbo in place in the Seat Mii.
  • Install the all-new turbo, checking that the locations are completely suitable
  • Install the oil return pipe
  • Replace each of the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine by hand to operate the turbo.
  • Reconnect all the components to the turbo of this Seat Mii.
  • Now that when each of the parts turns out to be installed, you will be able to start the engine and run it for 5 to 10 minutes.

Once everything is in place but also that the engine has been running for a while, you can take a ride in the Seat Mii to examine that the assembly works properly. It is also advisable to watch the oil and water level quite frequently in the weeks that follow. Write a comment in case this text was useful. See you soon !