Today we can find turbos on a lot of cars in circulation, whether in systems essences ou Diesel. Before starting these manipulations you will naturally have to be convinced that the problem comes from the turbo of your Seat Ronda. However, since you've come this far, it shows that you most likely know the reason.
How to change the turbo of your Seat Ronda
Depending on the turbo to be presented, the methods may fluctuate very slightly. If you get a turbocharger, the product will always be supplied with an assembly note. The best thing to do is therefore to follow it point by point. However, in case you have not made the purchase, you will find below the steps to follow in order to replace a turbo compressor in this Seat Ronda. In this way you will understand if you have the skills. Just before you start, make sure you have all of the tools adequate. You will have the utility of a container for engine oil, a bunch of ratchet wrenches, your pliers, allen keys as well as wrenches. Most of the time, the turbos will be delivered with their lot of utensils including some jointsFew studs and a syringe oil. However, we advise you to go see a professional simply because working with a pit remains much more convenient for this kind of work. What is more, the turbocharger is an extremely sensitive constituent on the Seat Ronda. Even if the operation is not particularly laborious, we still advise you to go to a mechanic.
- Drain the engine block then replace the oil filter. Replace a little oil, but not too much. This is an imperative phase!
- Remove all the plugs present on the turbocharger of your Seat Ronda.
- Check that there are no residues inside the casings, since this is undoubtedly a source of malfunction.
- Remove the ducts and all the screws, but also the nuts that will hold the turbocharger.
- Remove the faulty turbocharger from this Seat Ronda.
- Reassemble the famous turbocharger, checking that the seals stick completely
- Replace the oil return pipe
- Refit all of the screws and nuts you removed
- Fill the turbocharger with the oil supplied with the turbo
- Start the turbine with your hands in order to activate the turbocharger.
- Connect all components to the Seat Ronda turbocharger.
- Once all the components have been installed, you must start the engine block and let it run for a few minutes.
Now that the turbo is in place but also that the car has been running for ten minutes, it is necessary to take a ride in this Seat Ronda in order to verify that everything is going well. It is also advisable to check the oil level but also the water level quite often in the coming days. Post a comment in case our file served you. See you soon !