Nowadays we find the turbos on a lot of cars from the last 20 years, whether in systems essences ou Diesel. Just before starting these manipulations it is obviously necessary to be certain that the problem comes from the turbo of your Smart For-us. However, since you are on this page, this indicates that you probably know the source.change-turbo-Smart-For-us

How to change the turbo of your Smart For-us

Depending on the turbo to be positioned, the methods may vary slightly. When you buy a turbocharger, the product will usually be delivered with an assembly note. The best is therefore that you read it. That said, if you have not made the purchase, find out how to replace a turbo compressor in the Smart For-us. Thereafter you will understand what abilities are needed. Just before you start, make sure you have all of the tools required. You are going to have the utility of your oil container, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Usually, turbos will come with a tool kit that contains joints, studs as well as a little oil. However, we advise you to have it checked by a pro since tinkering with a pit turns out to be even more convenient for carrying out this kind of process. In addition, the turbocharger happens to be an extremely delicate element on this Smart For-us. Even if the operation is not frankly complex, we still advise you to go to a professional.

  • Change the engine oil then replace your oil filter. Add a little oil, without putting too much. This is a necessary manipulation!
  • Remove the different plugs present on the turbocharger of your Smart For-us.
  • Examine that there are no undesirable elements inside the casings, since this can be a source of concern.
  • Remove the conduits as well as each of the screws but also the nuts which allow to maintain your turbocharger.
  • Remove the turbocharger in place in this Smart For-us.
  • Reassemble the new turbocharger, checking that the seals stick completely
  • Fit the oil return pipe
  • Install the screws and nuts you removed
  • Fill the turbocharger with the supplied oil
  • Start the turbine by hand to operate the turbocharger.
  • Connect the various connections to the turbocharger of this Smart For-us.
  • Now that when the parts turn out to be in place, you need to start the engine and run it for 5-10 minutes.

Once everything is installed and screwed and of course the car has been running for at least 5 minutes, you can drive behind the wheel of this Smart For-us to check that everything is working well. We also advise you to check the oil and water level fairly frequently in the coming days. Write a comment in case our tutorial has been useful to you. Enjoy again!