Now we find these turbos on many cars on the market, whether for engines essences ou Diesel. Before starting the DIY you must of course be convinced that the problem comes from the turbo of this Smart Fortwo 3. However, given that you are reading this article, it shows that you probably know the reason.
How to change the turbo of your Smart Fortwo 3
Depending on the turbo to be positioned, processes may vary slightly. In the event that you purchase a turbocharger, the product is always sold with an instruction manual. The best is therefore to follow it point by point. However in the event that you have not made the purchase, here are the main axes so as to replace a turbo compressor for this Smart Fortwo 3. Subsequently you will know what capacities are necessary. Just before you start, make sure you have all of the tools required. You will have the use of your receptacle for the oil, a set of ratchets, a flat pliers, allen and flat wrenches. Often times, these turbos turn out to be supplied with a set of utensils that include joints, studs and a little oil. Despite everything, we suggest that you go to a mechanic because tinkering with a pit remains even more convenient for carrying out the procedures. In addition, the turbocharger is a rather fragile element in this Smart Fortwo 3. Even if the handling is not really laborious, it is still advisable to go to a specialist.
- Drain the engine then replace this oil filter. Put a bit of oil, in small quantity. It is essential manipulation!
- Remove all the plugs present on the turbocharger of this Smart Fortwo 3.
- Check that there are no residues in the crankcases, because this is undoubtedly a cause of malfunction.
- Remove the ducts as well as all the screws and then the nuts which will support this turbocharger.
- Remove the turbocharger in place in this Smart Fortwo 3.
- Fit the brand new turbocharger, checking that the seals stick exactly
- Fit the oil return pipe
- Fit all the screws and nuts you removed
- Fill the turbocharger using oil from your syringe
- Operate the turbine with your hands to activate the turbocharger.
- Connect all the connections to the turbocharger of the Smart Fortwo 3.
- Once all the parts are in place, you can start the engine and let it run for 5 to 10 minutes.
Once the turbo is in place and of course the engine has been running for 5 to 10 minutes, it is necessary to drive in this Smart Fortwo 3 to check that everything is working properly. At the same time, we advise you to check the oil level but also the water level quite often for 15 days. Write a comment if our tutorial was useful for you. Good walk !