Today we can find turbos in a large part of the vehicles in circulation, whether in engines essences ou Diesel. Before starting these operations, you must of course be convinced that the problem arises from the turbo of the famous smart smart. However, since you are on this page, you probably know the reason.change-turbo-smart-smart

How to change the turbo of your smart smart

Depending on the turbo to set up, some of the operations may fluctuate very slightly. As soon as you buy a turbocharger it will usually be sold with an achievement note. The best thing to do then is to follow it point by point. On the other hand, if you have not bought the product, find out what to do to be able to replace a turbo on this smart smart. Therefore you will understand whether you are capable of it or not. Before you start, make sure you have all the tools indispensable. You will need a receptacle for the engine oil, a bunch of ratchets, your flat pliers, your allen and flat wrenches. Most of the time, these turbos turn out to be sold with a tool kit that includes joints, studs and a portion oil. However, we recommend that you go to a professional because tinkering from a pit is more practical for this type of process. In addition, the turbocharger remains a fairly sensitive element in a smart smart. You should know that the operation is not very difficult, we still advise you to go to a specialist.

  • Drain the engine block and replace this oil filter. Add a sprig of oil, without putting too much. This is an essential manipulation!
  • Remove all the caps on the turbocharger of your smart smart.
  • Check that no foreign bodies are found within the housings, as this can sometimes be a cause for concern.
  • Remove the conduits but also all of the screws and then the nuts that will support this turbocharger.
  • Remove the turbocharger in place in your smart smart.
  • Install the all-new turbocharger, checking that the seals match completely
  • Refit the oil return pipe
  • Fit the necessary screws and nuts
  • Fill the turbocharger with the oil supplied with the turbo
  • Start the turbine with your hands to turn the turbocharger.
  • Reattach all the components to the smart smart turbocharger.
  • Once the components are in place, you will be able to start the engine block and let it run for a few minutes.

Now that the assembly is installed and also that the car has been running for a few minutes, you will be able to drive your smart smart so that you can see that the assembly is working correctly. It is also advisable to watch the amount of oil and water regularly in the days to come. Leave a comment if this text was useful to you. Good road !