Today we find these turbos in most cars on the market, whether it's systems essences ou Diesel. Just before starting these manipulations you obviously have to be convinced that the hassle comes from the turbo of this Suzuki Alto 2. Nevertheless given that you are on this page, this means that you probably know the source.
How to change the turbo on your Suzuki Alto 2
Depending on the turbo to install, some of the processes will be able to fluctuate a little. When you buy a turbocharger it always comes with an assembly note. The ideal is therefore that you follow it to the letter. However, in the event that you have not made the purchase, here are the operations to be done in order to replace a turbo compressor on the Suzuki Alto 2. Therefore you will understand if you have the skills. Before you start, be sure to have all the tools required. You will need your receptacle for the oil, a set of ratchets, your flat pliers, your allen wrenches as well as flats. Quite often, turbochargers turn out to be supplied with an assembly kit comprising a few jointsFew studs as well as a little oil. We nevertheless recommend that you go to a professional because working from a pit remains much easier to carry out this kind of work. And of course, the turbocharger is a particularly delicate element on the Suzuki Alto 2. You should know that handling is not really laborious, we still advise you to go to a garage.
- Drain the engine and replace your oil filter. Put a little oil, without putting too much. Here is a necessary manipulation!
- Remove all the caps that are on the turbocharger of the famous Suzuki Alto 2.
- Examine that there are no undesirable elements within the housings, as this is a source of the problem.
- Remove the ducts but also all the screws but also the nuts which hold your turbocharger.
- Remove the faulty turbocharger from the Suzuki Alto 2.
- Reassemble the new turbocharger, checking that the seals stick completely
- Install the oil return pipe
- Replace all the necessary screws and nuts
- Fill the turbocharger with the oil supplied with the turbo
- Rotate the turbine with your hands to operate the turbocharger.
- Reattach all of the components to the Suzuki Alto 2 turbocharger.
- Once all of the parts are in place, you will be able to start the engine and let it run for ten minutes.
Now that everything is in order and of course that the engine has been running for a while, you can walk around in the Suzuki Alto 2 to check that everything is working properly. It is also advisable to watch the quantity of oil but also of water quite frequently in the following weeks. Post a comment if this tutorial helped you. Enjoy again!