Today we find these turbos on a lot of cars in circulation, as much on engines essences ou Diesel. Just before embarking on this task you must of course be certain that the problem comes from the turbo of the famous Suzuki Alto. That said, since you are reading from us, it shows that you probably know the source.change-turbo-Suzuki-Alto

How to change the turbo of your Suzuki Alto

Compared to the turbo to position, methods may vary a bit. As soon as you buy a turbo the product will generally be sold with an instruction manual. The best thing to do is to follow it point by point. But if you still have not bought the product, we offer you the outline of how to replace a turbo in this Suzuki Alto. So you will know if you have the skills. Before you start, you must have all the tools indispensable. You will need a container for engine oil, a bunch of ratchets, your flat pliers, allen and open end wrenches. In general, the turbos will be supplied with their set of utensils including some jointsFew studs and a syringe oil. We nevertheless recommend that you go to a pro because tinkering with a pit remains even easier for handling. And of course, the turbo remains an extremely delicate component in this Suzuki Alto. You should know that the manipulation is not really complex, we still advise you to go to a technician.

  • Change the oil in the engine block then replace your oil filter. Put a sprig of oil, in a small quantity. This is an essential phase!
  • Remove all the plugs found on the Suzuki Alto turbo.
  • Check that there are no foreign bodies on the casings, since this is undoubtedly a cause of the problem.
  • Remove the conduits with all the screws and then the nuts which support your turbo.
  • Remove the existing turbo from this Suzuki Alto.
  • Reassemble the famous turbo, checking that the seals stick completely
  • Fit the oil return pipe
  • Replace the screws and nuts you removed
  • Fill the turbo with the supplied oil
  • Start the turbine manually so that the turbo operates.
  • Reconnect all the connections to the turbo of your Suzuki Alto.
  • Once the components are installed, you can turn on the engine block and operate it for 5 to 10 minutes.

Now that the assembly is installed and of course that the car has been running for at least 5 minutes, do not hesitate to walk behind the wheel of this Suzuki Alto in order to check that the assembly turns correctly. We also advise you to check the oil level but also the water level quite often in the following weeks. Post a comment if our tutorial was useful to you. Good road !