Nowadays we find these turbos in a large part of the vehicles in circulation, whether the systems essences ou Diesel. Just before you start the work you will obviously have to be convinced that the problem comes from the turbo of the famous Suzuki Baleno. However, since you have arrived so far, this indicates that you probably know the source.change-turbo-Suzuki-Baleno

How to change the turbo of your Suzuki Baleno

Depending on the turbo to be presented, some of the manipulations will be able to change a little. In the event that you obtain a turbo it is systematically delivered in the company of an instruction manual. It is best to follow it point by point. However if you have not made the purchase, we suggest the steps to replace a turbo for this Suzuki Baleno. This way you will know if you have the required skills. Just before you start, make sure you have all of the tools indispensable. You are going to use your engine oil receptacle, a bunch of ratchet wrenches, flat pliers, your allen and flat wrenches. Typically, turbochargers come with a mounting kit that includes a few jointsFew studs as well as a syringe oil. We still recommend that you go to a mechanic because tinkering with a pit is even easier to do the work. And of course, the turbo turns out to be a really fragile constituent on this Suzuki Baleno. Taking into account that the technique is not really laborious, we still advise you to go to a garage.

  • Drain the engine, then replace this oil filter. Replace a bit of oil, but not too much. It is a necessary procedure!
  • Remove the different plugs found on the turbo of your Suzuki Baleno.
  • Check that there are no foreign bodies in the housings, because this is sometimes a source of concern.
  • Remove the conduits with all the screws but also the nuts which will allow this turbo to hold.
  • Remove the faulty turbo from this Suzuki Baleno.
  • Fit the new turbo, checking that the seals match exactly
  • Refit the oil return pipe
  • Install the required screws and nuts
  • Fill the turbo using the oil supplied with the turbo
  • Rotate the turbine manually to operate the turbo.
  • Connect the various connections to the turbo of the Suzuki Baleno.
  • Once the components are assembled, you will start the engine and run it for 5 to 10 minutes.

Now that everything is installed and screwed and of course the engine has been running for a few minutes, you will be able to drive in this Suzuki Baleno to see that everything is working well. It is also advisable to watch the oil and water level quite often for 15 days. Write a comment in case this text helped you. Good walk !