Today we find these turbos on many cars of the last 20 years, as much on engines essences ou Diesel. Before starting the DIY you will obviously have to be sure that the problem comes from the turbo of this Suzuki Grand Vitara 2. However, since you are reading us, this shows that you probably know the reason.
How to change the turbo of your Suzuki Grand Vitara 2
Depending on the turbo to be presented, the processes may vary a little. When you buy a turbocharger it will usually come with a performance note. The best thing to do is to follow it point by point. However, if you have not yet made the purchase, you will find below the steps to follow in order to replace a turbo compressor in your Suzuki Grand Vitara 2. Therefore you will know if you are able or not. Before starting, make sure you have all of the tools indispensable. You will have the use of a receptacle for engine oil, a set of ratchets, your flat pliers, allen wrenches as well as flats. Typically, turbos turn out to come with a mounting kit that includes a few jointsFew studs and a syringe oil. We still recommend that you go see a mechanic because working with a pit remains much more convenient for doing this kind of work. And of course, the turbocharger turns out to be a fairly sensitive component in this Suzuki Grand Vitara 2. You should know that the technique is not particularly difficult, we advise you to go to a technician anyway.
- Drain the engine block then replace the oil filter. Put a bit of oil, but very little. This is an inevitable step!
- Remove all the plugs on the turbocharger of the Suzuki Grand Vitara 2.
- Check that there are no undesirable elements inside the housings, as this can be a source of concern.
- Remove the ducts with all the screws and the nuts that support the turbocharger.
- Remove the existing turbocharger from your Suzuki Grand Vitara 2.
- Fit the new turbocharger, checking that the locations match perfectly
- Fit the oil return pipe
- Fit all required screws and nuts
- Fill the turbocharger using oil from your syringe
- Operate the turbine with your hands to activate the turbocharger.
- Connect all the components to the turbocharger of the Suzuki Grand Vitara 2.
- Now that when all the parts are in place, you will be able to start the engine block and run it for about ten minutes.
Now that everything is in order and the engine has been running for a while, go ahead in your Suzuki Grand Vitara 2 to check that everything is running properly. We also recommend that you check the oil and water level regularly in the coming days. Leave a comment in case this tutorial was helpful. Good road !