Now we can find these turbos in a large part of new vehicles, whether for systems essences ou Diesel. Just before starting the DIY, you should of course be convinced that the malfunction is occurring with the turbo in your Suzuki Ignis 2. However, if you are reading this article, you probably know the source.change-turbo-Suzuki-Ignis-2

How to change the turbo of your Suzuki Ignis 2

Depending on the turbo to position, methods may change slightly. When you buy a turbocharger it is always sold with an instruction manual. It is best to follow it point by point. However, in case you have not yet made the purchase, here are the main points to replace a turbo compressor on a Suzuki Ignis 2. In this way you will understand what capacities are necessary. Just before starting, you must have all the tools required. You will need your receptacle for the engine oil, a bunch of ratchets, your flat pliers, allen wrenches as well as spanners. Often, these turbochargers will be found to be supplied with their set of utensils including joints, studs as well as a little oil. We nevertheless recommend that you have a mechanic checked by a mechanic simply because tinkering from a pit remains much easier to carry out the procedures. In addition, the turbocharger is a super sensitive component on a Suzuki Ignis 2. Taking into account that the technique is not particularly complex, it is still advisable to go to a mechanic.

  • Drain the engine and replace this oil filter. Replace a little oil, but not too much. It is a necessary manipulation!
  • Remove all the plugs on the Suzuki Ignis 2 turbocharger.
  • Examine that no foreign bodies are found within the housings, as this is a source of malfunction.
  • Remove the ducts and of course each of the screws but also the nuts which support this turbocharger.
  • Remove the faulty turbocharger from this Suzuki Ignis 2.
  • Fit the famous turbocharger, checking that the gaskets stick completely
  • Install the oil return pipe
  • Mount all the screws and nuts that you removed
  • Fill the turbocharger using the oil supplied with the turbo
  • Operate the turbine manually to activate the turbocharger.
  • Reattach all the connections to the turbocharger of your Suzuki Ignis 2.
  • Now that when all the parts are in place, you need to start the engine and let it run for 5 to 10 minutes.

Now that everything is in place, but also that the car has been running for a while, it is possible to take a turn behind the wheel of this Suzuki Ignis 2 so that you can see that everything is running correctly. We also advise you to check the quantity of oil but also of water quite often for 15 days. Leave a comment in the event that our tutorial was useful for you. Enjoy again!