Today we can find the turbos on a lot of cars in circulation, whether for engines essences ou Diesel. Before you start DIY, you obviously have to be certain that the problem arises from the turbo of this Suzuki Jimny. However, since you are on this page, it means that you certainly know the source.change-turbo-Suzuki-Jimny

How to change the turbo on your Suzuki Jimny

Depending on the turbo to be presented, processes may vary a little. When you buy a turbo, the product is systematically supplied with assembly instructions. It is therefore ideal that you follow it to the letter. That said, if you have not yet made the purchase, here are the steps to change a turbo in your Suzuki Jimny. In fact you will know what capabilities are needed. Before you start, make sure you have all of the tools adequate. You will use your oil receptacle, a set of ratchet wrenches, your flat pliers, your allen and flat wrenches. Most of the time, these turbos will be sold with a mounting kit that includes a few jointsFew studs and a portion oil. We still recommend that you have a professional check that tinkering with a pit is much easier to carry out these manipulations. What is more, the turbo remains a rather delicate element in the Suzuki Jimny. You should know that the technique is not extremely complex, it is still recommended to go to a mechanic.

  • Change the engine block oil and change your oil filter. Replace a little oil, but very little. It is an imperative manipulation!
  • Remove all the plugs present at the turbo of the famous Suzuki Jimny.
  • Watch that there are no desirable non-elements inside the casings, since this is sometimes a source of concern.
  • Remove the ducts with each of the screws and then the nuts which will hold your turbo.
  • Remove the turbo in place in this Suzuki Jimny.
  • Set up the brand new turbo, checking that the seals are completely suitable
  • Replace the oil return pipe
  • Replace all the screws and nuts you removed
  • Fill the turbo with the supplied oil
  • Operate the turbine manually so that the turbo turns.
  • Reconnect all the turbo connections of this Suzuki Jimny.
  • Once all the components turn out to be installed, you will start the engine block and let it run for a few minutes.

Once everything is in order but also that the engine has been running for a while, you will be able to walk around with this Suzuki Jimny so that you can see that everything is working properly. We also advise you to check the oil level but also the water level regularly in the weeks that follow. Write a comment if our guide was helpful to you. Enjoy the road!