Today we find these turbos in most cars on the market, whether for engines essences ou Diesel. Before starting the DIY it must of course be certain that the hassle comes from the turbo of your Suzuki Swift 2. But if you read this article, this means that you very probably know the source.change-turbo-Suzuki-Swift-2

How to change the turbo of your Suzuki Swift 2

Depending on the turbo to be positioned, the procedures may vary slightly. When you buy a turbo it will be systematically delivered with a manual. The best thing to do is therefore to read it. However, if you have not yet made the purchase, here are the main lines to change a turbo compressor on this Suzuki Swift 2. So you will understand if you have the skills. Before starting, make sure you have all of the tools adequate. You are going to use a bucket for engine oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Typically, turbos are sold with a mounting kit that includes joints, studs and a little oil. We still suggest that you have a professional check since working with a pit turns out to be even easier for this work. In addition, the turbo is an extremely fragile element for the Suzuki Swift 2. You should know that the handling is not extremely difficult, we still advise you to go to a garage.

  • Drain the engine block then change this oil filter. Add a small amount of oil. This is an inevitable manipulation!
  • Remove all the plugs found at the turbo of the famous Suzuki Swift 2.
  • Check that there are no residues on the casings, as this is undoubtedly a cause of malfunction.
  • Remove the conduits and each of the screws and nuts which will allow this turbo to hold.
  • Remove the failed turbo from the Suzuki Swift 2.
  • Fit the new turbo, checking that the seals fit perfectly
  • Fit the oil return pipe
  • Install each of the screws and nuts you removed
  • Fill the turbo using the oil supplied with the turbo
  • Start the turbine by hand to operate the turbo.
  • Reattach all the elements to the turbo of your Suzuki Swift 2.
  • Once each of the components are installed, you will be able to turn on the engine block and run it for 5 to 10 minutes.

Now that everything is in place and of course the engine has been running for a few minutes, you can take a ride behind the wheel of the Suzuki Swift 2 so that you can see that everything is working well. It is also advisable to look at the amount of oil but also of water quite often in the weeks that follow. Leave a comment in the event that our tutorial served you. Good road !