Now we find turbos on many new automobiles, whether for systems essences ou Diesel. Just before embarking on this task, you obviously need to be certain that the problem is with the turbo in your Suzuki Swift 3. However, if you are reading this article, it means that you probably know the source.change-turbo-Suzuki-Swift-3

How to change the turbo of your Suzuki Swift 3

Compared to the turbo to position, procedures will be able to vary a little. When you buy a turbo the product usually comes with an assembly note. The best is therefore to follow it point by point. But in the event that you have not made the purchase, here are the main ways to change a turbo compressor on the Suzuki Swift 3. So you will understand if you are able or not. Just before starting, you must have all of the tools adequate. You will have the use of your container for the oil, a bunch of ratchets, a pair of pliers, allen and flat wrenches. Most of the time, these turbos will come with a set of utensils that contains a few jointsFew studs as well as a dose oil. It is still advisable to go to a professional because working from a pit turns out to be much easier to do the procedures. In addition, the turbo remains a rather fragile element for this Suzuki Swift 3. Taking into account that the operation is not really complicated, we nevertheless advise you to go to a specialist.

  • Change the engine oil then change your oil filter. Replace a bit of oil, but very little. This is an essential step!
  • Remove all the plugs around the Suzuki Swift 3 turbo.
  • Check that there are no foreign bodies inside the housings, as this is undoubtedly a source of malfunction.
  • Remove the ducts and all the screws and nuts which support your turbo.
  • Remove the turbo in place in this Suzuki Swift 3.
  • Install the new turbo, checking that the seals fit exactly
  • Replace the oil return pipe
  • Fit all the necessary screws and nuts
  • Fill the turbo using oil from your syringe
  • Rotate the turbine with your hands to rotate the turbo.
  • Reconnect all the components to the turbo of this Suzuki Swift 3.
  • Once all the parts are in place, you can start the engine and run it for about ten minutes.

Now that the turbo is in place and the engine has been running for a few minutes, you can get around behind the wheel of this Suzuki Swift 3 to see that everything is running smoothly. We also advise you to check the oil and water level regularly in the following weeks. Leave a comment if this tutorial helped you. Good road !