Now we find these turbos in most vehicles on the market, both systems essences ou Diesel. Just before embarking on these manipulations you will naturally have to be sure that the problem comes from the turbo of the famous Suzuki Swift. Having said that, given that you've come this far, it reveals that you probably know the cause.
How to change the turbo of your Suzuki Swift
Compared to the turbo to be presented, some of the methods may fluctuate very slightly. When you buy a turbocharger it is usually sold with a performance note. The ideal is then to follow it point by point. On the other hand, in the event that you have not made the purchase, you will find below the steps to follow in order to replace a turbo for your Suzuki Swift. So you will understand whether you are capable of it or not. Before you start, make sure you have all of the tools required. You will have the utility of your receptacle for the engine oil, a set of ratchets, a flat pliers, allen wrenches as well as flat ones. Often these turbochargers will be supplied with an assembly kit that includes joints, studs as well as a dose oil. We still recommend that you go to a professional because working from a pit turns out to be easier to carry out this work. And of course, the turbocharger remains a particularly fragile element in this Suzuki Swift. Even if the technique is not really difficult, we still advise you to go to a specialist.
- Drain the engine block and replace this oil filter. Replace a little oil, without putting too much. This is an essential manipulation!
- Remove all the plugs found on the turbocharger of your Suzuki Swift.
- Check that there is no residue in the crankcases, as this can be a cause for concern.
- Remove the ducts but also all the screws and nuts which hold this turbocharger.
- Remove the turbocharger in place in your Suzuki Swift.
- Fit the brand new turbocharger, checking that the gaskets match precisely
- Install the oil return pipe
- Install each of the screws and nuts you removed
- Fill the turbocharger with the supplied oil
- Rotate the impeller by hand to rotate the turbocharger.
- Reconnect all the components to the turbocharger of this Suzuki Swift.
- Once each of the parts are installed, you will start the engine block and run it for about ten minutes.
Now that everything is in place and of course the engine has been running for 5 to 10 minutes, you can take your Suzuki Swift for a spin to check that the assembly is running smoothly. We also recommend that you check the oil and water level regularly for 15 days. Post a comment if this tutorial was helpful. See you soon !