Now we find the turbos on many vehicles of the last 20 years, as many on engines essences ou Diesel. Just before you get into the DIY you should of course be convinced that the problem comes from the turbo of this Suzuki Vitara 2. However, given that you are reading us, this shows that you probably know the reason.change-turbo-Suzuki-Vitara-2

How to change the turbo of your Suzuki Vitara 2

Depending on the turbo to be set up, procedures may change a bit. When you purchase a turbocharger, the product is always supplied with an instruction manual. It is therefore best that you follow it to the letter. But in case you still have not bought the product, you will find below the operations to be done in order to change a turbo in a Suzuki Vitara 2. Subsequently you will know what capacities are necessary. Before you start, make sure you have all the tools required. You will need a container for the engine oil, a set of ratchets, flat pliers, allen wrenches as well as flat keys. Often, turbos will be delivered with their set of utensils including some jointsFew studs and a little oil. We still recommend that you go to a pro since working from a pit is much easier to perform these operations. What is more, the turbocharger is an extremely fragile component for a Suzuki Vitara 2. You should know that the technique is not particularly complex, we still advise you to go to a garage.

  • Change the engine oil and change the oil filter. Put a bit of oil, but very little. It is an inevitable phase!
  • Remove all of the plugs found on the turbocharger of the Suzuki Vitara 2.
  • Check that there are no residues within the housings, because this is undoubtedly a cause of the problem.
  • Remove the ducts and of course all the screws and nuts which will hold the turbocharger.
  • Remove the faulty turbocharger from your Suzuki Vitara 2.
  • Fit the new turbocharger, checking that the seals match completely
  • Refit the oil return pipe
  • Install all of the screws and nuts you removed
  • Fill the turbocharger with the supplied oil
  • Start the turbine by hand to activate the turbocharger.
  • Reconnect all the components to the turbocharger of the Suzuki Vitara 2.
  • Once all of the components are installed, you can start the engine and let it run for 5 to 10 minutes.

Now that the turbo is in place and the engine has been running for 5 to 10 minutes, feel free to drive your Suzuki Vitara 2 so that you can see that everything is working correctly. It is also advisable to watch the level of oil but also of water regularly for 15 days. Leave a comment in case our text helped you. Enjoy again!