Now we find the turbos on many vehicles of the last 20 years, as many on engines essences ou Diesel. Just before you start the work, you will naturally have to be sure that the problem is with the turbo in your Suzuki X90. But seeing as you are reading this article, it probably means you know the reason.change-turbo-Suzuki-X90

How to change the turbo of your Suzuki X90

Depending on the turbo to install, processes may vary slightly. When you buy a turbo it is always sold with an assembly instructions. The best thing to do is read it like this. That said, in case you have not yet made the purchase, here are the steps to do to replace a turbo compressor in a Suzuki X90. You will then find out if you have the required skills. Before starting, make sure you have all of the tools required. You will need a bucket for engine oil, a bunch of ratchets, your flat pliers, your allen wrenches as well as flat ones. Usually, these turbos will be supplied with their tool kit which includes some jointsFew studs and a dose oil. We still advise you to have a pro checked simply because working from a pit remains even easier to do this kind of work. And of course the turbo is a pretty fragile component in the Suzuki X90. Even though the operation is not extremely laborious, we still advise you to go to a garage.

  • Drain the engine then replace this oil filter. Add a little oil, in a small quantity. This is an essential manipulation!
  • Remove all the plugs present around the turbo of the Suzuki X90.
  • Check that there is no residue on the crankcases, as this can be a cause for concern.
  • Remove the ducts with each of the screws but also the nuts that hold this turbo.
  • Remove the existing turbo from the Suzuki X90.
  • Set up the brand new turbo, checking that the locations stick exactly
  • Replace the oil return pipe
  • Install all required screws and nuts
  • Fill the turbo using the oil provided
  • Start the turbine manually to operate the turbo.
  • Reattach all components to the Suzuki X90 turbo.
  • Now that when all the components are assembled, you can start the engine and let it run for a few minutes.

Now that everything is in order and of course that the engine has been running for 5 to 10 minutes, it is possible to take a ride behind the wheel of the Suzuki X90 to check that everything is working correctly. It is also advisable to check the oil level but also the water level quite frequently in the days to come. Leave a comment if this guide was helpful. Good road !