Now we find the turbos in a large part of the automobiles of the last 20 years, whether for engines essences ou Diesel. Before starting these operations, you must obviously be convinced that the malfunction is due to the turbo of this Toyota 1000. However, since you are on this page, it means that you probably know the cause.change-turbo-Toyota-1000

How to change the turbo of your Toyota 1000

Depending on the turbo to be installed, some of the procedures may fluctuate a bit. When you buy a turbocharger it is always sold with an achievement note. The ideal is therefore to follow it point by point. However if you have not made the purchase, find out the steps to follow to be able to change a turbo for a Toyota 1000. Subsequently you will find out what capacities are required. Just before starting, you must have all the tools required. You will need your container for the oil, a set of ratchets, flat pliers, your allen and flat wrenches. Often these turbochargers turn out to be sold with their mounting kit which contains a few jointsFew studs and a syringe oil. We nevertheless recommend that you have a specialist checked since working from a pit is much more convenient to carry out the work. What is more, the turbocharger is an extremely sensitive component in this Toyota 1000. Even though the operation is not really laborious, we nevertheless advise you to go to a specialist.

  • Drain the engine and change your oil filter. Add a little oil, without putting too much. It is a necessary step!
  • Remove all the plugs found on the turbocharger of the Toyota 1000.
  • Check that no residue is found inside the crankcases, because this is undoubtedly a cause of malfunction.
  • Remove the ducts and of course all the screws and then the nuts that will hold your turbocharger.
  • Remove the turbocharger in place in your Toyota 1000.
  • Install the all-new turbocharger, checking that the seals match completely
  • Fit the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbocharger with the supplied oil
  • Operate the turbine by hand to turn the turbocharger.
  • Refit all the components to the turbocharger of this Toyota 1000.
  • Once all the components are in place, you will be able to start the engine and let it run for a few minutes.

Now that the assembly is installed but also that the car has been running for a few minutes, you must drive your Toyota 1000 to see that everything runs correctly. At the same time, we advise you to check the oil and water level regularly for 15 days. Write a comment if this tutorial was useful to you. Enjoy the road!