Nowadays we find these turbos in most new automobiles, whether for systems essences ou Diesel. Before you start this task you will of course have to be sure that the problem comes from the turbo of the famous Toyota 2000 Gt Mf 12. But since you have come this far, you probably know the reason .change-turbo-Toyota-2000-Gt-Mf-12

How to change the turbo of your Toyota 2000 Gt Mf 12

Depending on the turbo to install, procedures may change slightly. When you buy a turbo it will always be sold with an achievement note. The ideal is then to follow it point by point. On the other hand, in the event that you have not made the purchase, we suggest the operations to be done in order to change a turbo compressor for your Toyota 2000 Gt Mf 12. This way you will know if you are able or not. . Before you start, make sure you have all the tools indispensable. You are going to need a bucket for the engine oil, a bunch of ratchets, a pair of pliers, your allen wrenches as well as flats. Typically, turbos will happen to be sold with a tool kit that includes a few jointsFew studs and a little oil. We still recommend that you have an inspection done by a mechanic because working with a pit is easier to do the procedures. And of course, the turbo is a particularly fragile component for this Toyota 2000 Gt Mf 12. You should know that the technique is not super complex, we still advise you to go to a garage.

  • Drain the engine then change your oil filter. Add a small amount of oil. This is an inevitable procedure!
  • Remove all the plugs found around the turbo of the Toyota 2000 Gt Mf 12.
  • Check that no undesirable elements are found inside the housings, as this can be a source of malfunction.
  • Remove the conduits with all the screws and nuts that hold your turbo.
  • Remove the faulty turbo from the Toyota 2000 Gt Mf 12.
  • Reassemble the famous turbo, checking that the locations are suitable precisely
  • Fit the oil return pipe
  • Reassemble all the screws and nuts that you removed
  • Fill the turbo using oil from your syringe
  • Rotate the turbine with your hands to operate the turbo.
  • Assemble all the components to the turbo of your Toyota 2000 Gt Mf 12.
  • Now that when all the components are in place, you will be able to start the engine and let it run for about ten minutes.

Now that the turbo is in place and the car has been running for at least 5 minutes, it is possible to take a turn behind the wheel of the Toyota 2000 Gt Mf 12 to check that the assembly is functioning correctly. At the same time, it is advisable to check the oil level but also the water level regularly in the days to come. Leave a comment if this tutorial was useful to you. See you soon !