Now we find these turbos in a large part of the cars in circulation, whether it be the engines essences ou Diesel. Before starting the DIY you will of course have to be sure that the problem comes from the turbo of this Toyota 4runner. That said, since you are on this page, it means that you probably know the source.
How to change the turbo of your Toyota 4runner
Compared to the turbo to be implemented, methods may vary a bit. As soon as you get a turbocharger it will be systematically sold with a manual. The best is therefore that you follow it to the letter. But in case you still haven't made the purchase, here are the main axes below to replace a turbo for the Toyota 4runner. In this way you will understand if you have the skills. Just before you start, you must have all of the tools required. You are going to need your bucket for engine oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Typically, turbochargers are supplied with a tool kit that includes a few jointsFew studs but also a little oil. It is still advisable to have a check done by a mechanic because working with a pit turns out to be even easier to do the manipulations. And of course, the turbocharger remains a fairly delicate component for this Toyota 4runner. Even if the technique is not particularly complicated, it is nevertheless advisable to go to a professional.
- Drain the engine block and replace this oil filter. Put back a sprig of oil, without putting too much. This is an essential procedure!
- Remove all the plugs found on the turbocharger of the famous Toyota 4runner.
- Check that there are no foreign bodies inside the housings, because this is undoubtedly a source of malfunction.
- Remove the ducts as well as all of the screws and the nuts that hold this turbocharger.
- Remove the existing turbocharger from the Toyota 4runner.
- Reassemble the famous turbocharger, checking that the locations correspond completely
- Replace the oil return pipe
- Fit all the screws and nuts that you removed
- Fill the turbocharger using the oil supplied
- Rotate the turbine manually to rotate the turbocharger.
- Reconnect all the components to the turbocharger of your Toyota 4runner.
- Now that all of the parts have been installed, you must start the engine block and let it run for a few minutes.
Now that the turbo is in place but also that the engine has been running for at least 5 minutes, you will be able to drive with the Toyota 4runner so as to check that the assembly works properly. It is advisable at the same time to check the quantity of oil but also water regularly in the weeks that follow. Post a comment if this file has ever helped you. Enjoy the road!