Now there are turbos in most new vehicles, whether in systems essences ou Diesel. Before you start this task, you must obviously be convinced that the problem arises from the turbo of the famous Toyota Auris 2 Tourings. That said, given that you are reading this article, it reveals that you certainly know the cause.
How to change the turbo of your Toyota Auris 2 Tourings
Compared to the turbo to pose, the handling will be able to vary slightly. When you purchase a turbocharger it usually comes with an assembly note. The best is that you follow it to the letter. However, if you have not made the purchase, here are the steps to take to replace a turbo for your Toyota Auris 2 Tourings. So you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You will need your oil bucket, a set of ratchets, your flat pliers, allen wrenches as well as flat wrenches. Usually, these turbochargers will be sold with their set of utensils which includes joints, studs and a portion oil. We still advise you to go to a mechanic because working from a pit remains even more practical for work. Additionally, the turbocharger happens to be a really tricky constituent for the Toyota Auris 2 Tourings. You should know that handling is not really difficult, we nevertheless advise you to go to a specialist.
- Change the engine oil and replace this oil filter. Add a bit of oil, but very little. This is an imperative procedure!
- Remove all the caps on the turbocharger of this Toyota Auris 2 Tourings.
- Check that there are no undesirable elements in the casings, as this is undoubtedly a source of malfunction.
- Remove the ducts as well as all the screws and then the nuts which hold this turbocharger.
- Remove the faulty turbocharger from your Toyota Auris 2 Tourings.
- Refit the brand new turbocharger, checking that the seals stick exactly
- Replace the oil return pipe
- Replace the set of screws and nuts you removed
- Fill the turbocharger with the supplied oil
- Manually start the turbine to operate the turbocharger.
- Reattach all the connections to the turbocharger of this Toyota Auris 2 Tourings.
- Once all the components are in place, you can start the engine and let it run for about ten minutes.
Now that the turbo is in place but also that the car has been running for 5 to 10 minutes, it is possible to walk around with your Toyota Auris 2 Tourings to check that the assembly is working properly. It is also advisable to check the level of oil but also of water quite often in the following weeks. Leave a comment if our text was useful to you. Good walk !