Nowadays you can find these turbos on a lot of vehicles in circulation, whether in engines essences ou Diesel. Just before you start this task you must of course be certain that the hassle comes from the turbo of the famous Toyota Auris 2. But since you are reading this article, it means that you probably know the source.change-turbo-Toyota-Auris-2

How to change the turbo of your Toyota Auris 2

Depending on the turbo to be positioned, procedures may vary a bit. In the event that you obtain a turbocharger, this will usually be delivered with an instruction manual. The best is therefore that you read it. However if you have not made the purchase, here are the main axes below to replace a turbo in the Toyota Auris 2. Therefore you will know if you have the skills. Before starting, you must have all the tools adequate. You are going to need a bucket for engine oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. In general, turbos will be supplied with their mounting kit including joints, studs but also a syringe oil. We still recommend that you have a professional check because working with a pit is easier to carry out the work. Furthermore, the turbocharger is a rather sensitive component for a Toyota Auris 2. Even if the operation is not extremely difficult, it is nevertheless advisable to go to a mechanic.

  • Drain the engine and replace this oil filter. Replace a small amount of oil. This is an essential manipulation!
  • Remove all the plugs found on the turbocharger of your Toyota Auris 2.
  • Check that there are no residues inside the casings, since this is sometimes a source of malfunction.
  • Remove the conduits as well as all the screws but also the nuts which make it possible to hold this turbocharger.
  • Remove the turbocharger in place in the Toyota Auris 2.
  • Install the new turbocharger, checking that the seals fit exactly
  • Refit the oil return pipe
  • Install the screws and nuts you removed
  • Fill the turbocharger with oil from your syringe
  • Start the turbine manually to activate the turbocharger.
  • Reconnect all components to the turbocharger of the Toyota Auris 2.
  • Once the parts are in place, you will start the engine and let it run for 5 to 10 minutes.

Once everything is installed and screwed but also that the engine has been running for ten minutes, you can take a ride in the Toyota Auris 2 to check that everything is working properly. At the same time, we advise you to look at the level of oil but also of water fairly often for 15 days. Post a comment in case this file helped you. Good walk !