Nowadays we find the turbos on a lot of cars from the last 20 years, whether in engines essences ou Diesel. Just before starting the DIY you will of course have to be sure that the problem arises from the turbo of your Toyota Avensis. However, since you are reading to us, you probably know the cause.
How to change the turbo of your Toyota Avensis
Compared to the turbo, the methods may change slightly. When you get a turbo it will usually be delivered with a manual. The ideal is as you read it. By cons in the event that you have not made the purchase, here are the steps to follow to replace a turbo in the Toyota Avensis. Then you will find out if you have the skills. Before starting, you must have all of the tools required. You are going to have the utility of an oil receptacle, a bunch of ratchet wrenches, your flat pliers, your allen and flat wrenches. Generally, these turbochargers are found to be supplied with their tool kit which includes joints, studs as well as a little oil. We still advise you to go see a specialist because working with a pit remains easier to do the procedures. And of course, the turbo happens to be a pretty fragile constituent for the Toyota Avensis. Even if the handling is not very laborious, we still advise you to go to a technician.
- Change the engine oil and replace your oil filter. Add a small amount of oil. This is a necessary step!
- Remove the various plugs around the turbo of this Toyota Avensis.
- Check that there are no foreign bodies in the casings, because this is undoubtedly a cause of problem.
- Remove the conduits with all the screws and the nuts that support your turbo.
- Remove the turbo in place in your Toyota Avensis.
- Reassemble the famous turbo, checking that the locations stick precisely
- Refit the oil return pipe
- Reassemble all the screws and nuts that you removed
- Fill the turbo with oil from your syringe
- Manually rotate the turbine to activate the turbo.
- Reconnect the various elements to the turbo of your Toyota Avensis.
- Once all the parts are in place, you can start the engine and let it run for ten minutes.
Now that the assembly is installed but also that the engine has been running for a few minutes, it is necessary to drive with your Toyota Avensis in order to check that the assembly is working properly. It is also advisable to check the oil and water level regularly in the weeks that follow. Leave a comment in case this text was useful to you. Good road !