Nowadays we find the turbos in a large part of the cars in circulation, as much on systems essences ou Diesel. Just before embarking on DIY it is of course necessary to be certain that the problem lies with the turbo of this Toyota Aygo 2. However, since you are reading us, it means that you most likely know the reason.change-turbo-Toyota-Aygo-2

How to change the turbo of your Toyota Aygo 2

Compared to the turbo to position, manipulations will be able to vary a bit. When you buy a turbocharger it is always delivered with an assembly note. The best thing to do is therefore to follow it point by point. However in the event that you still have not made the purchase, you will find below the main axes to be able to change a turbo compressor on a Toyota Aygo 2. In this way you will understand if you are able or not. Before starting, make sure you have all of the tools required. You are going to need your container for the engine oil, a bunch of ratchets, flat pliers, allen and open end wrenches. Usually, turbos will come with a tool kit that contains joints, studs but also a little oil. We still suggest that you go see a mechanic because working with a pit remains much more convenient to do the manipulations. And of course, the turbocharger is a really delicate component for the Toyota Aygo 2. Even though the technique is not super laborious, we nevertheless advise you to go to a professional.

  • Drain the engine block and change your oil filter. Replace a little oil, but very little. It is a necessary phase!
  • Remove all the plugs that are found around the turbocharger of the famous Toyota Aygo 2.
  • Check that no foreign bodies are found inside the housings, as this is a source of concern.
  • Remove the ducts with each of the screws and then the nuts that will support your turbocharger.
  • Remove the faulty turbocharger from this Toyota Aygo 2.
  • Reassemble the famous turbocharger, checking that the seals stick exactly
  • Install the oil return pipe
  • Install the screws and nuts you removed
  • Fill the turbocharger using the oil supplied with the turbo
  • Start the turbine manually to operate the turbocharger.
  • Assemble all components to the turbocharger of this Toyota Aygo 2.
  • Once the parts are installed, you must start the engine block and let it run for 5 to 10 minutes.

Now that everything is in place but also that the engine has been running for a few minutes, you can drive in this Toyota Aygo 2 to see that everything is working correctly. It is also advisable to watch the amount of oil and water quite frequently for 15 days. Write a comment if you found this guide helpful. Enjoy again!