Today we can find turbos on many cars of the past 20 years, whether it's the engines essences ou Diesel. Before starting this task it is of course necessary to be sure that the problem comes from the turbo of this Toyota Camry 3. But if you have arrived so far, this reveals that you probably know the reason.change-turbo-Toyota-Camry-3

How to change the turbo of your Toyota Camry 3

Depending on the turbo to be installed, some of the methods may fluctuate very slightly. When you get a turbo it is systematically sold with a manual. It is therefore best that you follow it to the letter. However in case you have not made the purchase, below you will find the main axes in order to change a turbo compressor in a Toyota Camry 3. In fact you will know if you have the required skills. Just before you start, make sure you have all of the tools adequate. You are going to use your bucket for engine oil, a bunch of ratchet wrenches, your pliers, allen and flat wrenches. Most of the time, the turbos will be delivered with a tool kit including some jointsFew studs and a portion oil. We suggest you nevertheless go to a pro simply because tinkering from a pit is even more convenient to carry out these procedures. In addition, the turbo is a particularly fragile component in this Toyota Camry 3. Even if the operation is not really complex, it is still advisable to go to a technician.

  • Drain the engine block and change this oil filter. Replace a small amount of oil. This is an imperative phase!
  • Remove all the plugs present on the turbo of the Toyota Camry 3.
  • Check that there is no residue in the crankcases, since this is a cause for concern.
  • Remove the conduits and all the screws and nuts which allow this turbo to be held.
  • Put the turbo in place in your Toyota Camry 3.
  • Fit the all-new turbo, checking that the locations are perfectly suitable
  • Fit the oil return pipe
  • Refit the required screws and nuts
  • Fill the turbo using the oil provided
  • Start the turbine manually so that the turbo operates.
  • Attach all the elements to the turbo of this Toyota Camry 3.
  • Now that when the parts turn out to be assembled, you can turn on the engine block and run it for a few minutes.

Now that the assembly is installed, but also that the car has been running for 5 to 10 minutes, you can walk around with your Toyota Camry 3 so as to check that the assembly is working properly. We also recommend that you check the amount of oil and water fairly frequently in the weeks that follow. Post a comment if this guide has ever helped you. See you soon !