Today we can find the turbos in most new vehicles, as much on engines essences ou Diesel. Before embarking on this task it is necessary of course to be sure that the problem arises from the turbo of the famous Toyota Camry 5. However since you are on this page, this means that you very probably know the reason.
How to change the turbo of your Toyota Camry 5
Depending on the turbo to be installed, processes may vary slightly. As soon as you buy a turbo it will usually be sold with a manual. So the best thing to do is to follow it step by step. However if you have not bought the product, below you will find the main lines to replace a turbo compressor for your Toyota Camry 5. So you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You are going to need your bucket for oil, a set of ratchet wrenches, your flat pliers, allen keys as well as flat. Usually, these turbos will be sold with a lot of utensils that contains joints, studs and a syringe oil. However, we recommend that you go to a mechanic because working with a pit is easier to do these procedures. And of course, the turbo happens to be a rather sensitive component on a Toyota Camry 5. Even if the technique is not really difficult, we advise you nevertheless to go to a garage.
- Change the engine block oil then replace your oil filter. Put a bit of oil back, but not too much. It is a necessary procedure!
- Remove all the plugs found on the turbo of your Toyota Camry 5.
- Check that there are no residues inside the casings, as this is a cause of malfunction.
- Remove the conduits but also all of the screws as well as the nuts which will allow your turbo to hold.
- Remove the faulty turbo from this Toyota Camry 5.
- Install the new turbo, checking that the locations are completely suitable
- Fit the oil return pipe
- Replace all of the screws and nuts that you removed
- Fill the turbo with the supplied oil
- Operate the turbine with your hands to turn the turbo.
- Assemble all the elements to the turbo of your Toyota Camry 5.
- Now that when all the parts have been installed, you can start the engine block and run it for ten minutes.
Now that everything is in order and of course the engine has been running for some time, it is necessary to drive in this Toyota Camry 5 in order to check that everything is running properly. It is advisable at the same time to check the quantity of oil but also of water quite frequently in the days to come. Leave a comment in case this tutorial served you. See you soon !