Now we find these turbos in a large part of the vehicles of the last 20 years, as much on the engines essences ou Diesel. Just before you start the work you must of course be sure that the hassle occurs from the turbo of the famous Toyota Corolla 5. But if you are reading to us, it is that you probably know the source.change-turbo-Toyota-Corolla-5

How to change the turbo of your Toyota Corolla 5

Depending on the turbo to be installed, procedures may fluctuate very slightly. When you get a turbo it is systematically sold with an assembly manual. It is best if you read it. However if you have not yet made the purchase, here are the steps to follow in order to replace a turbo compressor in the Toyota Corolla 5. So you will know what capacities are needed. Just before you start, make sure you have all the tools adequate. You are going to have the use of an oil receptacle, a set of ratchet wrenches, your flat pliers, allen and flat wrenches. Often turbos will be sold with a mounting kit that includes a few jointsFew studs as well as a portion oil. However, we suggest that you go to a specialist because working with a pit turns out to be much easier to do this kind of work. And of course, the turbo happens to be a particularly sensitive constituent on the Toyota Corolla 5. Taking into account that the technique is not super laborious, we advise you nevertheless to go to a garage.

  • Change the engine block oil and replace your oil filter. Put back a bit of oil, but very little. It is an imperative manipulation!
  • Remove all the plugs present on the turbo of this Toyota Corolla 5.
  • Check that there are no residues in the casings, since this is undoubtedly a source of concern.
  • Remove the conduits but also all the screws as well as the nuts which allow your turbo to hold.
  • Remove the existing turbo from your Toyota Corolla 5.
  • Reassemble the brand new turbo, checking that the seals fit exactly
  • Refit the oil return pipe
  • Reinstall all the required screws and nuts
  • Fill the turbo with the supplied oil
  • Operate the turbine by hand to operate the turbo.
  • Connect all the components to the turbo of the Toyota Corolla 5.
  • Once all the components are installed, you must start the engine block and run it for ten minutes.

Once everything is in place and the car has been running for ten minutes, you should take a ride in your Toyota Corolla 5 in order to see that everything is working well. It is also advisable to check the oil and water level often enough for 15 days. Write a comment if this guide has ever been helpful. Good walk !