Now we find the turbos in most new cars, whether for systems essences ou Diesel. Just before starting this task, you will of course have to be convinced that the problem comes from the turbo in this Toyota Corolla 6. However, since you are reading us, it means that you probably know the cause.
How to change the turbo of your Toyota Corolla 6
Some of the methods can fluctuate a little compared to the turbo to be installed. In the event that you buy a turbocharger it will always be supplied with assembly instructions. The best thing to do is to follow it to the letter. However, if you still have not made the purchase, below you will find the outline for replacing a turbo on the Toyota Corolla 6. So you will know if you are able or not. Before you start, make sure you have all the tools required. You will need a bucket for the engine oil, a set of ratchets, your flat pliers, allen wrenches as well as flats. Usually, the turbos will be supplied with their tool kit including some jointsFew studs as well as a portion oil. However, we recommend that you go see a mechanic because working with a pit remains more convenient to do this work. In addition, the turbocharger is a particularly delicate element for this Toyota Corolla 6. Taking into account that handling is not extremely complicated, it is still advisable to go to a garage.
- Drain the engine then replace the oil filter. Put a bit of oil, without putting too much. This is an imperative step!
- Remove all the caps that are on the turbocharger of the Toyota Corolla 6.
- Check that no foreign bodies are found in the housings, because this can sometimes be a source of malfunction.
- Remove the ducts and of course all the screws but also the nuts which will hold the turbocharger.
- Remove the turbocharger in place in the Toyota Corolla 6.
- Reassemble the famous turbocharger by checking that the locations are perfectly suitable
- Refit the oil return pipe
- Replace all the required screws and nuts
- Fill the turbocharger with the oil supplied with the turbo
- Rotate the impeller by hand to rotate the turbocharger.
- Reattach all the connections to the Toyota Corolla 6 turbocharger.
- Now that when all the parts are complete, you will start the engine and let it run for a few minutes.
Now that everything is installed and screwed, but also that the car has been running for at least 5 minutes, you will be able to take a ride in the Toyota Corolla 6 to see that everything works properly. We also advise you to check the quantity of oil but also of water regularly for 15 days. Leave a comment if our tutorial was useful to you. Enjoy the road!