Today we find the turbos on a lot of cars in circulation, whether it's the engines essences ou Diesel. Before starting the DIY you will of course have to be sure that the fault is with the turbo of this Toyota Corolla 7. But since you have come this far, it means that you probably know the source.
How to change the turbo of your Toyota Corolla 7
Depending on the turbo to be positioned, the procedures may fluctuate very slightly. When you buy a turbocharger it will usually be supplied with assembly instructions. The ideal is then to follow it point by point. Having said that, if you still have not made the purchase, here are the guidelines for changing a turbo compressor on your Toyota Corolla 7. Therefore you will know if you are able or not. Just before starting, you must have all the tools required. You will need a bucket for the oil, a bunch of ratchets, your flat pliers, your allen and flat wrenches. Typically, turbochargers come with a set of utensils that include a few jointsFew studs as well as a portion oil. It is still advisable to go to a professional because tinkering from a pit is even more practical to do this kind of work. What's more, the turbocharger remains a super delicate component for the Toyota Corolla 7. Even though handling is not very laborious, we still advise you to go to a professional.
- Drain the engine and change your oil filter. Replace a little oil, in a small quantity. This is an inevitable procedure!
- Remove all the plugs that are found around the turbocharger of the famous Toyota Corolla 7.
- Examine that there are no undesirable elements in the housings, because this is undoubtedly a source of problem.
- Remove the ducts and of course all the screws and nuts which hold your turbocharger.
- Remove the existing turbocharger from the Toyota Corolla 7.
- Install the famous turbocharger, checking that the locations stick precisely
- Install the oil return pipe
- Refit the required screws and nuts
- Fill the turbocharger with the supplied oil
- Start the turbine manually so as to activate the turbocharger.
- Reconnect all connections to the turbocharger of this Toyota Corolla 7.
- Now that when the components are found to be installed, you will turn on the engine and let it run for 5 to 10 minutes.
Now that the turbo is in place but also that the engine has been running for a while, you can walk around in the Toyota Corolla 7 to check that everything is running correctly. It is also advisable to watch the level of oil but also of water quite often in the days to come. Post a comment if this file has been useful to you. Enjoy again!