Now there are turbos in most cars on the market, whether for engines essences ou Diesel. Just before starting this task you will of course have to be sure that the problem is with the turbo in your Toyota Corolla 8. But since you are on this page, it means that you probably know the cause.change-turbo-Toyota-Corolla-8

How to change the turbo of your Toyota Corolla 8

Compared to the turbo to set up, methods may vary slightly. When you purchase a turbocharger it will usually be sold with an assembly note. The best is then that you follow it to the letter. Having said that, if you still have not made the purchase, here are the steps to take to replace a turbo compressor in this Toyota Corolla 8. This way you will know if you are able or not. Just before you start, be careful to have all of the tools required. You will have the use of a bucket for oil, a bunch of ratchets, your flat pliers, your allen wrenches as well as flat ones. Most of the time, these turbos are sold with a set of utensils including joints, studs but also a syringe oil. We still advise you to have a verification done by a pro because tinkering with a pit is easier to do these processes. In addition, the turbocharger is a fairly sensitive element on this Toyota Corolla 8. You should know that the operation is not really complicated, we nevertheless advise you to go to a technician.

  • Drain the engine and replace the oil filter. Add a little oil, without adding too much. This is a necessary phase!
  • Remove all the caps from the Toyota Corolla 8 turbocharger.
  • Watch that there are no unwanted elements in the housings, as this can be a source of problem.
  • Remove the conduits and of course each of the screws as well as the nuts which support the turbocharger.
  • Remove the existing turbocharger from your Toyota Corolla 8.
  • Install the famous turbocharger, checking that the locations stick completely
  • Fit the oil return pipe
  • Install the necessary screws and nuts
  • Fill the turbocharger with the oil supplied with the turbo
  • Manually rotate the turbine to activate the turbocharger.
  • Reconnect all the components to the Toyota Corolla 8 turbocharger.
  • Now that when the parts turn out to be in place, you can start the engine and let it run for about ten minutes.

Once everything is in order and the car has been running for about ten minutes, you must get around behind the wheel of your Toyota Corolla 8 in order to check that everything is running correctly. We also advise you to check the oil level but also the water level quite often for 15 days. Leave a comment if our tutorial was useful to you. Good road !