Nowadays you can find these turbos in most new vehicles, as many on engines essences ou Diesel. Before you start these manipulations, you will naturally have to be certain that the malfunction occurs of the turbo of your Toyota Corolla 9. But since you are on this page, this shows that you probably know the reason.
How to change the turbo of your Toyota Corolla 9
Depending on the turbo to be installed, procedures will be able to change a bit. When you get a turbocharger, the product will usually be sold with an Achievement Note. It is best to follow it to the letter. However, in case you have not yet made the purchase, here are the steps to follow in order to change a turbo compressor on the Toyota Corolla 9. So you will know what capacities are required. Just before you start, make sure you have all of the tools adequate. You will use a receptacle for engine oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Usually, these turbos will be supplied with their lot of utensils which includes some jointsFew studs and a little oil. We still advise you to go see a mechanic simply because working from a pit is even easier for handling. Furthermore, the turbocharger happens to be an extremely fragile element in a Toyota Corolla 9. Even if the handling is not super laborious, it is still recommended to go to a mechanic.
- Drain the engine block and change this oil filter. Put a bit of oil back, but not too much. This is an inevitable procedure!
- Remove all the plugs that there are on the turbocharger of your Toyota Corolla 9.
- Check that there are no undesirable elements in the casings, since this is undoubtedly a source of malfunction.
- Remove the conduits but also each of the screws but also the nuts which allow this turbocharger to be held.
- Remove the existing turbocharger from this Toyota Corolla 9.
- Install the famous turbocharger, checking that the locations stick exactly
- Fit the oil return pipe
- Fit all required screws and nuts
- Fill the turbocharger with the supplied oil
- Rotate the turbine manually to activate the turbocharger.
- Connect all of the components to the turbocharger of your Toyota Corolla 9.
- Once all of the components are found to be installed, you must turn on the engine block and let it run for 5 to 10 minutes.
Now that the assembly is installed and of course the car has been running for some time, it is possible to drive the steering wheel of this Toyota Corolla 9 so that you can see that the assembly turns correctly. It is also advisable to check the oil level but also the water level regularly for 15 days. Write a comment if you ever found this tutorial useful. Good walk !