Now we find the turbos in most cars in circulation, whether it's systems essences ou Diesel. Just before starting work, we will naturally have to be sure that the problem arises from the turbo of the famous Toyota Corona. However, since you are reading this article, it means that you most likely know the cause.
How to change the turbo of your Toyota Corona
Depending on the turbo to be installed, processes may change very slightly. When you get a turbo it usually comes with an installation guide. The best thing to do is then follow it to the letter. By cons if you have not made the purchase, here are the main axes to be able to change a turbo compressor in your Toyota Corona. Therefore you will understand if you have the skills. Just before you start, you must have all of the tools required. You are going to have the utility of an oil receptacle, a bunch of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Often, these turbos will be supplied with their mounting kit which includes joints, studs but also a portion oil. We still recommend that you have a professional check it out simply because tinkering with a pit is much more practical for these processes. And of course, the turbo is a particularly fragile element in the Toyota Corona. Even if the technique is not really difficult, we still advise you to go to a garage.
- Drain the engine block and change your oil filter. Add a little oil, without putting too much. It is an essential phase!
- Remove the various plugs present on the turbo of this Toyota Corona.
- Check that there are no residues in the housings, since this is a cause of malfunction.
- Remove the conduits but also all the screws and nuts that will support your turbo.
- Remove the faulty turbo from this Toyota Corona.
- Reassemble the famous turbo, checking that the locations stick completely
- Replace the oil return pipe
- Install the screws and nuts you removed
- Fill the turbo with oil from your syringe
- Operate the turbine manually so that the turbo operates.
- Connect the various connections to the turbo of the Toyota Corona.
- As soon as the components are assembled, you will be able to start the engine block and run it for a few minutes.
Now that everything is in place but also that the car has been running for 5 to 10 minutes, it is possible to walk around behind the wheel of this Toyota Corona so as to check that the whole is turning properly. We also advise you to check the oil and water level regularly in the coming days. Post a comment in the event that our file served you. Enjoy the road!