Nowadays there are turbos on a lot of cars in circulation, as much on engines essences ou Diesel. Before getting started, you must obviously be sure that the problem comes from the turbo of your Toyota Cressida. However, if you are reading this article, it means you likely know the reason.change-turbo-Toyota-Cressida

How to change the turbo of your Toyota Cressida

Depending on the turbo to be positioned, methods may vary slightly. In case you get a turbocharger this will always be sold with a performance note. The best thing to do is then follow it to the letter. But in case you have not bought the product, here are the main lines so as to replace a turbo compressor in this Toyota Cressida. In this way you will understand whether you are capable of it or not. Just before you start, make sure you have all the tools required. You will need your receptacle for engine oil, a bunch of ratchet wrenches, flat pliers, your allen and flat wrenches. Usually, turbochargers will be delivered with their mounting kit including some jointsFew studs and a dose oil. We still recommend that you have a specialist check since working from a pit turns out to be more convenient for carrying out these procedures. Furthermore, the turbocharger turns out to be a rather fragile constituent for a Toyota Cressida. Even if the technique is not super difficult, we still advise you to go to a technician.

  • Drain the engine block then replace your oil filter. Add a little oil, but not too much. This is a necessary step!
  • Remove all the plugs around the turbocharger of the famous Toyota Cressida.
  • Check that there are no residues in the housings, since this can be a cause for concern.
  • Remove the ducts and all the screws as well as the nuts which hold your turbocharger.
  • Remove the turbocharger in place in the Toyota Cressida.
  • Install the new turbocharger, checking that the seals match exactly
  • Replace the oil return pipe
  • Replace all the necessary screws and nuts
  • Fill the turbocharger with oil from your syringe
  • Start the turbine by hand in order to activate the turbocharger.
  • Connect all the connections to the turbocharger of the Toyota Cressida.
  • Now that when all of the components have been installed, you must start the engine block and run it for a few minutes.

Once everything is installed and screwed and the car has been running for at least 5 minutes, you can drive the Toyota Cressida to see that everything is working properly. It is advisable at the same time to check the oil level but also the water fairly frequently for 15 days. Post a comment if this file has ever been useful. Good walk !