Today we find turbos in most cars on the market, whether in systems essences ou Diesel. Before starting the work it is necessary to naturally be convinced that the problem comes from the turbo of this Toyota Crown. That said, since you are on this page, it shows that you likely know the cause.change-turbo-Toyota-Crown

How to change the turbo of your Toyota Crown

Depending on the turbo to be presented, procedures may vary a bit. When you buy a turbocharger, the product will be systematically supplied with an instruction manual. The ideal is therefore that you read it. That said, if you have not yet made the purchase, here are the main axes to change a turbo in the Toyota Crown. So you will know if you are capable of it or not. Before you start, make sure you have all of the tools required. You will need a container for engine oil, a set of ratchet wrenches, your pliers, allen and flat wrenches. Usually, the turbochargers will be delivered with a mounting kit including some jointsFew studs as well as a portion oil. It is still advisable to go to a mechanic because tinkering with a pit remains easier to do this kind of work. Furthermore, the turbocharger turns out to be a rather delicate component for a Toyota Crown. Taking into account that handling is not extremely difficult, we nevertheless advise you to go to a technician.

  • Change the engine block oil then change the oil filter. Add a little oil, but not too much. This is an imperative procedure!
  • Remove all the plugs from the turbocharger in this Toyota Crown.
  • Check that no desirable non-elements are found in the casings, since this is undoubtedly a source of malfunction.
  • Remove the ducts and all the screws and nuts which will hold the turbocharger.
  • Place the turbocharger in place in your Toyota Crown.
  • Reassemble the new turbocharger, checking that the seals stick exactly
  • Refit the oil return pipe
  • Replace all of the screws and nuts that you removed
  • Fill the turbocharger with the oil supplied with the turbo
  • Rotate the turbine with your hands to activate the turbocharger.
  • Connect all the components to the turbocharger of this Toyota Crown.
  • Once all the parts turn out to be assembled, you have to start the engine block and let it run for a few minutes.

Now that everything is in place and the engine has been running for ten minutes, it is possible to take a ride with your Toyota Crown to see that the assembly works well. At the same time, we advise you to check the oil and water level quite often in the coming days. Write a comment if this tutorial ever helped you. Enjoy the road!