Today we can find the turbos on many vehicles on the market, as many on the systems essences ou Diesel. Just before starting the DIY it is of course necessary to be certain that the hassle comes from the turbo of your Toyota Endo. But since you are reading this article, you probably know the cause.change-turbo-Toyota-Endo

How to change the turbo of your Toyota Endo

Depending on the turbo to be installed, the procedures may vary slightly. As soon as you get a turbocharger, it will always be supplied with an assembly note. The ideal is therefore that you read it. However, if you have not yet made the purchase, find out how to replace a turbo for a Toyota Endo. This way you will understand if you have the skills. Just before you start, be careful to have all the tools required. You are going to use a bucket for oil, a bunch of ratchet wrenches, your pliers, your allen and flat wrenches. Generally, these turbochargers will be delivered with their mounting kit which includes joints, studs as well as a dose oil. We still recommend that you have a mechanic check that tinkering with a pit is more convenient for this type of manipulation. In addition, the turbocharger remains an extremely fragile component on this Toyota Endo. Taking into account that the operation is not extremely complex, we nevertheless advise you to go to a garage.

  • Drain the engine and replace the oil filter. Put back a bit of oil, but very little. It's an imperative step!
  • Remove all the plugs present on the turbocharger of the famous Toyota Endo.
  • Check that there are no residues on the casings, since this is sometimes a cause of concern.
  • Remove the ducts with all the screws and nuts which will hold the turbocharger.
  • Remove the faulty turbocharger from this Toyota Endo.
  • Install the famous turbocharger, checking that the seals correspond completely
  • Replace the oil return pipe
  • Replace each of the necessary screws and nuts
  • Fill the turbocharger with oil from your syringe
  • Rotate the turbine by hand to operate the turbocharger.
  • Reconnect all the elements to the turbocharger of the Toyota Endo.
  • As soon as each of the components are installed, you can start the engine and run it for ten minutes.

Now that everything is installed and screwed and of course the engine has been running for a while, it is possible to walk around with this Toyota Endo to see that everything is going well. It is also advisable to check the amount of oil and water regularly for 15 days. Leave a comment in case this text helped you. Enjoy again!