Now we can find these turbos on a lot of vehicles in circulation, whether engines essences ou Diesel. Just before starting DIY you must obviously be convinced that the problem comes from the turbo of the famous Toyota Fun Cruiser. However, since you are reading to us, this reveals that you certainly know the cause.change-turbo-Toyota-Fun-Cruiser

How to change the turbo of your Toyota Fun Cruiser

Compared to the turbo to be implemented, methods may change slightly. In the event that you buy a turbocharger, the product is generally sold in the company of an instruction manual. It is best to follow it point by point. However if you have not bought the product yet, here are the steps to take in order to replace a turbo compressor on this Toyota Fun Cruiser. Then you will know if you have the skills. Just before you start, make sure you have all of the tools adequate. You will need your bucket for engine oil, a set of ratchet wrenches, your flat pliers, allen and flat wrenches. Generally, these turbochargers are supplied with their tool kit which contains a few jointsFew studs but also a portion oil. It is nevertheless advisable to have a check done by a mechanic because working with a pit is even more practical for doing this work. And of course, the turbocharger remains a rather sensitive component for the Toyota Fun Cruiser. Taking into account that the operation is not extremely complex, we nevertheless advise you to go to a professional.

  • Drain the engine block then replace this oil filter. Replace a little oil, but very little. This is an imperative procedure!
  • Remove all the plugs around the turbocharger of the Toyota Fun Cruiser.
  • Check that there are no desirable non-elements in the casings, because that is a source of problem.
  • Remove the conduits but also all of the screws and nuts that support this turbocharger.
  • Remove the turbocharger in place in this Toyota Fun Cruiser.
  • Set up the famous turbocharger, checking that the locations correspond completely
  • Install the oil return pipe
  • Install all the screws and nuts you removed
  • Fill the turbocharger using the oil supplied
  • Start the turbine with your hands to activate the turbocharger.
  • Reconnect all the connections to the turbocharger of your Toyota Fun Cruiser.
  • Once all the components are mounted, you can turn on the engine block and let it run for a few minutes.

Once everything is in place and of course the engine has been running for about ten minutes, you will be able to drive this Toyota Fun Cruiser to check that everything is working properly. We also advise you to check the oil level but also the water level regularly for 15 days. Leave a comment in case this tutorial was useful to you. Enjoy again!